Specifications - Hitachi D 10VF Technical Data And Service Manual

5. SPECIFICATIONS

5-1. Specifications
Model
Electric brake
Capacities Steel
Wood
Drill chuck
Power source
Type of motor
Enclosure
Type of switch
Full load current
Power input
Power output
Speed
Weight
with keyed
chuck
with keyless Net (without cord)
chuck
Packaging
Cord
Standard accessories
*Spec. only for the keyed chuck.
D 10VF
Twist bit
3/8" (10 mm)
Hole saw
NR
Flat spade bit
1" (25 mm)
Auger bit
NA
Self feed bit
NA
Hole saw
1-1/8" (29 mm)
Mount type
Capacity
1/32" -- - 3/8" (0.8 mm -- - 10 mm)
Housing and handle: Glassfiber reinforced polyamide resin
Grip cover: Glassfiber reinforced polypropylene resin + elastomer
Gear cover and inner cover: Aluminum alloy die casting
Variable speed control trigger switch with reversing switch
Full-load
Max.
No-load 0 -- - 3,000/min.
Full-load 1,700/min.
4.0 lbs.(1.8 kg)
Net (without cord)
7.5 lbs.(3.4 kg)
Gross
4.0 lbs.(1.8 kg)
7.5 lbs.(3.4 kg)
Gross
Chuck wrench
Plastic case
D 10VG
3/8" (10 mm)
1-1/2" (38 mm)
1-1/4" (32 mm)
NA
NA
2-3/4" (70 mm)
UNF 1/2 - 20
AC single phase 120 V 60 Hz
AC single phase series commutator motor
9 A
1,020 W (1.37 HP)
500 W (0.67 HP)
710 W (0.95 HP)
0 -- - 1,200/min.
720/min.
4.2 lbs.(1.9 kg)
7.7 lbs.(3.5 kg)
4.2 lbs.(1.9 kg)
7.7 lbs.(3.5 kg)
Plastic case (in corrugated cardboard sleeve)
2-core cabtire cord 2.5 m (8.2 ft.)
1*
Side handle 1
• • •
• • •
1
Chuck wrench 1*
• • •
• • •
Plastic case 1
• • •
--- 3 ---
D 13VF D 13VG
1/2" (13 mm)
1/2" (13 mm)
2" (51 mm)
3-3/4" (70 mm)
1-1/2" (38 mm)
1-1/2" (38 mm)
1-1/4" (32 mm)
1-1/2" (38 mm)
2-1/8" (54 mm)
2-9/16" (65 mm)
4" (102 mm)
4-1/2" (114 mm)
1/16" -- - 1/2" (1.5 mm -- - 13 mm)
0 -- - 850/min. 0 -- - 600/min.
570/min. 360/min.
4.6 lbs.(2.1 kg) 4.6 lbs.(2.1 kg)
8.1 lbs.(3.7 kg) 8.1 lbs.(3.7 kg)
4.4 lbs.(2.0 kg)
8.0 lbs.(3.6 kg)
Side handle 1
Side handle
• • •
Chuck wrench 1*
Handle joint
• • •
Plastic case 1
Chuck wrench
• • •
Plastic case
---
---
1
• • •
1
• • •
1*
• • •
1
• • •