Specifications - Manson Engineering Industrial SBC-8138 User Manual

J. Specifications
Model
AC Input Voltage 200-240VAC, 50Hz~
AC Input Current at Full Load (at 230VAC)
Output (Charge) Voltage Selections
WET
AGM
GEL
CALCIUM
Recondition (for WET Battery only)
Power Supply Mode
Maximum Output Charging Current
Soft Start Bulk Charge
Battery Voltage to Trigger (cut-in) Soft Start Bulk Charge Mode
Soft Start Bulk Charge Current Level (current limit)
Ripple & Noise (Peak to Peak)
Efficiency at WET (230VAC)
Protections
Short Circuit Protection
Overload Protection
Reverse Polarity Protection (by Mosfet)
Over Temperature Protection
OVP (Output Tracking Over Voltage Protection)
(can be disable by end user)
Thermal decrease of charger output power
Thermostatically Controlled Variable Speed Fan (0-full speed)
Approvals
Charge Cycle, Protection Indication
Build in Temperature Sensor in Battery Clamp
Plastic Housing with Mounting Flange
Dimension (WxHxD)
Weight
Accessories
Recommended Battery Capacity Range
SBC-8138
Yes
2.9A
Absorption Float
14.4V 13.5V
14.3V 13.2V
14.1V 13.7V
15.1V 13.8V
15.9V / 3A
13.3V
25A
<11V
1/2 of the charging current
<200mV
>85%
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CE EN 60335 ; EN 55014 ; EN 62233
LED indicators for charging status, mode and fault
Yes
Yes
220 x 80 x 140mm (8.7 x 3.2 x 5.5inch)
2kgs (4.4Lbs)
Charging Cable with Battery Clamp
20AH to 250AH
SBC-8238
Absorption Float
28.8V 27.0V
28.6V 26.4V
28.2V 27.4V
30.2V 27.6V
31.8V / 3A
26.6V
13A
<22V
10AH to 125AH
Rev.0 09/2013
7673-8138-0000