Table of Contents
Advertisement
J. Specifications
Model
Absorption Charge Voltage Selections
Float Charge Voltage Selections
Battery Charger / Power Supply Selections
Maximum Output Charging Current (Continuous)
Recommended Battery Capacity Range
Soft Start Bulk Charge
Battery Voltage to Trigger (cut-in) Soft Start
Bulk Charge Mode
Output
Soft Start Bulk Charge Current (Current Limit)
Line Regulation (180-260V) for Charging Current
Ripple and Noise (Peak to Peak)
Efficiency at Maximum Power
Dual Bank Charging (Battery must be of same type) No
AC Voltage Range
Input
AC Current at Full Load
Overload
Short Circuit
Protection
Reverse Polarity
Over Temperature
OVP Output Over Voltage
Cooling
Cooling Method
3 Stage Battery Charger / Power Supply Mode
Charge Phase Bulk / Absorption / Float
Indicators
Fault Mode
AC Power
AC Fuses at IEC AC Power Socket
Fuses
DC Car Blade Fuse at Front Panel
Cable & Spare Fuses
Accessories
Remote Temperature Sensor
Safety : EN 60335
Approvals
EMC : EN 55014
Others
Dimensions and Weight
Remarks
All values are based on the standard ambient temperature 25°C and pressure 0.1Mpa.
SBC – 2110
SBC – 2115
AGM/GEL : 14.2V
WET : 14.6V
13.2V, 13.5V, 13.8V
Yes
Yes
10A
15A
40 – 100AH
60 – 150AH
<10.5V
5A
7.5A
<0.6%
100mV
100mV
90%
87%
Yes
180 – 260V 50Hz~
1.2A
1.8A
90-110% Rated Output Current or 50% Rated Output Current (Soft
Charge)
Protection Type : Constant Current Limiting, recovers Automatically after
Fault Condition is Removed.
Recovers Automatically After Fault Condition is Removed
Car Blade Fuse
Protection Type:Automatically de-rate Charge Current Until Zero or Shut
Down
Yes
Convection Cool
Thermostatic, Variable Speed Fan, Fan stops at
Float
Yes
Yes
Yes
Yes
T2A
T3.15A
20A
30A
Yes
Optional
Yes
Yes
160x61x173mm ; 1.3kg 160x61x173mm ; 1.4kg 160x61x207mm ; 1.6kg
SBC - 2120
CALCIUM-CALCIUM : 15.5V
Yes
20A
80 - 200AH
10A
150mV
82%
Yes
3A
T5A
30A
Rev. 1.1 12/2007
7673-2120-0001
Advertisement
Table of Contents
