Table of Contents
Advertisement
7
1.2
System Startup
After connecting all peripheral devices, connect power cord to the DVR for system startup.
Once the DVR is started, image will be displayed on the screen.
To operate the DVR, login is required as the administrator. The factory default of password is
"1234".
The factory default of user and password are "ADMIN" and "1234" respectively. Admin user can
fully control the entire DVR system.
Note Do not forget the administrator's password that was set for the first time. In case the
password is forgot, contact your local dealer for help.
Caution It may take a few minutes to startup the system after turning on the power, in case
that user sets the network configuration as DHCP mode but there is neither DHCP
server in user's network nor physical network connection.
Advertisement
Table of Contents
