Record - Vision VHD-400 Series User Manual

35
Note PTZ operation works properly only when the PTZ setup in the DVR is the same as that of
PTZ camera.
3.3

Record

3.3.1. Camera
Recording Type
User can select recording type among Continuous, Event & Pre-Event
In case of Event & Pre-Event, user can set Period for each type.
On
Select to record each channel.
Name
In order to distinguish the channel from the others, user can designate the channel name.
It can be set at the Camera in Device menu, either.
Period
It can be set for the recording type of Event or Pre-Event.
When the event occurs, DVR records images during the set period for Event and Pre-Event.
It can be set at each Device menu, either.
Res(Resolution)
User can set each channel's resolution for recording.
FPS
User can set recording frame rate for each channel. Each channel can be set in between 1~30fps.
However, the frame rate can be restricted depending on the DVR model.
Quality
There are four different quality levels for recording.(Low/Standard/High/Highest)
User can select one of them in consideration of recording period, importance of each camera
image and so on.
Audio
Select to record audio together with image.