System Set; Basic Set - Vision DVR-800-2015 Quick Setup Manual

SYSTEM SET

The SYSTEM SET menu contains the Recording, Alarm and Network settings of the DVR.
On entering the SYSTEM SET menu you will see the options shown above

BASIC SET

The BASIC SET contains the basic information on the DVR and Vehicle.
As has been described previously use the arrow and ENTER buttons on the r/c to highlight and
change the settings (unless otherwise described).
DATE sets the system Date and Time
To change the time and date use the numeric
buttons on the r/c to set the new time. To
delete a number press the DEL button on the
r/c.
Note if a GPS connected the date and time will
update automatically (but not the Time Zone).
Please note that the other setting...
IDLE TIME, DEVICE NO, MAIN INFO, NAME, REMARK, BLIND VALUE
... are only used for systems supplied with live-view and/ or Wi-Fi capability and their functionality is
covered in a separate manual
DATE TYPE sets the displayed Time Format.
Sets the TIMEZONE (We recommend that this
is set as GMT +0 as otherwise you have to
manually change this on every system every
time the clocks change).
In the NUMBER box you can enter the Vehicle
Registration number which will be
watermarked onto the recorded video.
To enter the registration number highlight the
box and press ENTER. This will call up a
virtual keyboard which you can use to select
numbers and letters using the arrow keys and
ENTER button. When you have set the
number press the ESC button to exit.
Highlight the SAVE option and press the
ENTER button on the r/c to save the changes.