Operation; User Log-In - Vision VHD-400 Series User Manual

Operation

2.
2.1

User Log-in

Check the power connection.
Input USER and PASSWORD for login after turning on the system. The factory default of user and
password are "ADMIN" and "1234" respectively. Admin user is to fully control the entire DVR
system.
Note 1) LOGIN window will be permanently displayed in monitor as above picture until user
logs in with the correct ID and password.
2) If DVR is set not to check the ID and password, login process is not necessary.
Please refer to the "Section 3.1.2 User" for details.
10