Canon Laser Shot LBP2900 User Manual page 54

2
Push the side paper guides out a little wider than the actual
width of the paper.
3
Before loading transparencies or labels, fan them in small
batches and align the edges.
Thoroughly fan in small batches.
CAUTION
Be careful not to cut your hands with the edges of transparencies or label
paper.
IMPORTANT
Make sure you thoroughly fan through transparencies and label paper before
•
loading them. If you do not sufficiently fan the sheets, multiple sheets will feed at
once causing paper jams.
When fanning or aligning the transparencies, try to hold the edges to avoid
•
touching the printing surface.
Take care not to mark or stain the printing surface of the transparencies with
•
fingerprints, dust, or oil. Doing so may reduce the printing quality.
Printing on Plain Paper, Heavy Paper, Label Paper, and Transparencies
Stand the paper on a flat
surface and gently tap it a few
times to align the edges.
2
2-15