Canon Laser Shot LBP2900 User Manual page 204

2
Configure the following settings as needed:
[Detect Paper Size in Multi-purpose
Tray]:
[Rotate Print Data 180 Degrees]:
[Use Skip Blank Pages Mode]:
3
Click [Advanced Settings] in the [Finishing Details] dialog
box.
The [Advanced Settings] dialog box is displayed.
When this box is checked, a message is displayed and
the print job is paused if the [Output Size] setting in the
[Page Setup] sheet of the current print job is different
from the previous print job.
To print on the paper currently loaded in the printer,
click [ ] (Resolve Error) in the Printer Status
Window.
To print on different paper than the paper currently
loaded in the printer, reload the new paper then click
[ ] (Resolve Error) in the Printer Status Window.
However, the first job that you print straight after
turning the printer off and on will print onto the
currently loaded paper without displaying a message,
regardless of the [Output Size] setting.
When this box is unchecked, the job prints on the
paper currently loaded in the printer regardless of the
[Output Size] setting.
Rotates the print data by 180 degrees while printing.
This function can be used to print on envelopes, index
card and other material that can only be fed to the
printer in one specific direction.
When this option is checked, blank pages are not
output if the job includes blank pages.
Using the Printing Functions
4
4-39