NOTE
The procedure for displaying the [Document Properties] dialog box may differ
depending on the application you are using.
7
Specify the printing preferences in the [Page Setup],
[Finishing], [Paper Source], and [Quality] sheets.
NOTE
The settings that are specified here only apply to the currently opened file. Check
•
the contents of the [Document Properties] dialog box each time you print. In
particular, it is recommended that you verify the information in the [Page Setup]
sheet and the [Paper Source] sheet.
You can configure the default settings for all files by opening the [Document
•
Properties] dialog box from the [Printers and Faxes] folder or the [Printers] folder.
(See "Opening the [Document Properties] Dialog Box from the [Printers and Faxes]
or [Printers] Folder," on p. 4-10)
8
Click [OK].
The [Print] dialog box reappears.
9
Click [OK].
The printer starts printing.
NOTE
If the document does not print properly, refer to Chapter 6 "Troubleshooting".
•
Printing from an Application
4
4-5