Table of Contents
Advertisement
SAUNACORE
Note:
All power supply wires
from control box to stove
must be protected by
metal conduit.
IMPORTANT!
Loose connections or connectors
may cause electrical shortage.
Make sure all connections and
connectors are firmly secure.
11
Commander Control For Emitters Power Supply
European Connection
( L2 = N - "Neutral" )
For supply connections, use suitable AWG wires suitable for at least
90 C (190 F). (Use copper wire only). - Ground wire must be insulated.
o
o
CAUTION: THE MANUAL RESET LIMIT SHALL BE WIRED
IN THE CIRCUIT.
Figure 16
www.saun
acore.com
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Heaters and is the answer not in the manual?
Questions and answers
What size wire to use from the controler to the heater (I.e. 14/2 )
The power supply wires from the Saunacore heater controller to the heater must use a suitable AWG wire rated for at least 90°C (190°F) and must be copper.
This answer is automatically generated