Charging - CEL 18v Li-Ion User Manual

Charging the Battery
1. Place the charger in a safe position away
from moisture, heat or any hazard to the
charger or other danger.
2. Connect to suitable power outlet and
switch on.
The red light blinking and green light lit
indicates an error. Check the temperature in
the area is within specified limits or wait for
the battery to cool down.
NOTES:
A new battery or one that is completely
run down should be charged for 4 hours.
After normal use a battery should be fully
charged in about 1 hour.
3. Turn the battery so
the rails slide
smoothly into place
on the charger and
press together firmly.
Charging lights indicator
LIGHT
POWER ON

CHARGING

CHARGED
ERROR
It is normal for the battery charger to hum and
be warm but not hot during operation.
If the battery does not charge properly, check
to make sure the electrical outlet is "live" and
that the air surrounding the battery and
charger is between
(50ºF) and (75ºF).
Make sure the battery is correctly fitted.
Unplug the charger when not in use and
store it in a dry, secure place. Always
remove the battery Pack and store it in a
dry, secure place when the trimmer is not
in use.
RED GREEN
ON OFF
ON ON
ON BLINK
BLINK ON
10ºC and 24ºC
5.0