Page 1
18v Li-ion Cordless Hedge Trimmer User Manual Innovation from C Enterprise Ltd...
Page 2
THANK YOU Thank you for investing in a CEL product. The 18v Li-Ion Cordless Hedge Trimmer has been engineered and made to demanding high quality standards; ease of operation and safety have taken a major role in development. Proper care of your product will give you years of trouble-free use.
Contents Important Safety Notes GETTING Unpacking Parts and Controls STARTED Battery Charging Safety Notes Before Cutting CUTTING Hedge Trimming Tips Cutting Maintenance, Storage, Environment CARE 10.0 11.0 Technical Specifications Manual Version: 2009-0A Designed and edited in the UK Printed in China...
Important Notes Description of symbols The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. General Read Keep Dry Wear Eye Keep Flying Sharp Hazard Instructions Protection Bystanders Debris Blades Away Breathing protection should be worn when cutting some plants.
Page 5
Important Notes Rubber gloves and non- slip footwear are recommended while working outdoors. If you have long hair, wear a protective hair covering. Use safety accessories. Safety glasses and ear muffs should always be worn. Do not overreach. Keep your footing secure and balanced at all times. Look after your tools.
Unpacking Cordless Hedge Trimmer NOTE HT 1 Hedge Trimmer Due to modern mass production techniques, it is unlikely that your Blade Sheath power tool is faulty or that a part Charger Unit is missing. If you find anything wrong, do not operate the tool Li-Ion Battery until the parts have been replaced This User Manual...
Description of Parts and Controls Before using the saw, familiarise yourself with all the operating features and safety requirements. Front handle 3 direction Switch Lever Dual Oscillating Blades Safety Guard Rear Switch Lever Rear handle Battery Pack Release Battery...
Page 8
Battery The battery pack for this tool has been shipped in a low charge condition. Before use you should charge the battery pack fully. WARNING, Do not throw used batteries into fire or water, It could cause an explosion! WARNING, Do not use an extension cord. WARNING.
Charging Charging lights indicator LIGHT GREEN POWER ON CHARGING BLINK CHARGED ERROR BLINK firmly. If the battery does not charge The red light blinking and green properly, check to make sure the light lit indicates an error. Check electrical outlet is “live” and that the temperature in the area is the air surrounding the battery and within specified limits or wait for...
Page 10
Hedge Trimming Tips Shaping Trim a hedge so that it is wider at the bottom than the top. This improves light penetration and promotes healthy growth. Narrow the hedge approximately 100mm for every 1m in height. A bush can be round or column shaped. Only cut new growth in the summer, reshape the hedge in winter.
Safety Notes Before Cutting Always check for danger to for trimming soft, new growth people, animals, and only. Use the tool and yourself before activating accessories only for the trimmer. Beware of hidden applications intended. All other objects in, around and applications are expressly ruled behind the hedge.
Cutting Protect General Read Keep Dry Keep Flying Sharp Eyes, Ears, Hazard Instructions Bystanders Debris Blades Lungs Away Before starting your hedge trimmer remove blade sheath Switching on and off 1. To switch on, press both the trigger switch and bar switch at the same time.
Page 13
For more tips, techniques and tools please visit www.cel-garden.com NOTE If you notice some flashing in the ventilation slots, this is not a cause for alarm, It is normal and does not affect the operation of the trimmer.
Do I need to fully discharge the battery cut? before recharging it? The HT1 Hedge Trimmer was designed to cut up No the Li-Ion system has no memory effect so to 10mm thickness, larger branches (up to you can charge it at any time. The charge will be...
Page 15
Maintenance, Environment, Storage WARNING, Switch off and remove the battery before carrying out any maintenance on the tool. Lubrication After each: use, carefully clean the blades with a brush and lightly lubricate with general purpose oil or spray lubricant. Ask your dealer for suitable products. General inspection Regularly check that all the fixing screws are present and tight.
- 18V DC 1.5A Dimensions - 945x205x215mm - approx (37x8x8") Weight including batteries - 2.25Kg (5lbs) Product Code - HT1 If you experience any problems with the product please contact email: sales@cel-global.com www.cel-garden.com GENERAL HAZARD BEWARE OF FLYING SAFETY ALERT...
Need help?
Do you have a question about the HT1 and is the answer not in the manual?
Questions and answers