Maintenance, Storage, Environment - CEL 18v Li-Ion User Manual

Maintenance, Environment, Storage
WARNING, Switch off and remove
the battery before carrying out any
maintenance on the tool.
Lubrication
No Lubrication is necessary, the bearing area sealed.
After each: use, carefully clean the trimmer with a brush or rag.
Clear any debris from around the moving parts.
General inspection
Regularly check that all the fixing screws are present and tight. They may vibrate loose over
time.
Keep the tool's air vents unclogged and clean at all times.
Remove dust and dirt regularly.
Cleaning is best done with compressed air or a rag.
Never use caustic agents to clean plastic parts.
CAUTION, Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent
on a damp cloth is recommended. Water must never come into contact with the tool.
When the time comes to dispose of this product please consider the environment and take it
to a recognised recycling facility instead of disposing with general household waste.
The trimmer uses a Lithium Ion (Li-Ion) battery which must be disposed of properly.
Call your local council, civic amenity site, or recycling centre for information on the recycling
and disposal of electrical products and Lithium Ion (Li-Ion) batteries.
Storage
Store the tool, instruction manual and accessories in a secure, dry place. In this way you will
always have all the information and parts ready to hand.
Never Store the Trimmer With a Flat Battery.
The battery should ideally be stored between 10ºC and 24ºC (50ºF) and (75ºF).
WARNING, The blade that cuts
the line is sharp.
9.0