Important Safety Notes - CEL 18v Li-Ion User Manual

Important Notes 1.0
Description of symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Protect
General Read Keep Dry Keep Flying Sharp
Eyes, Ears,
Hazard Instructions Bystanders Debris Blades
Lungs
Away
Breathing protection should be worn when cutting some plants.
Use at a distance of at least 5m from other people.
Conforms to relevant standards for electromagnetic compatibility.
Safety instructions
To use this tool properly, you must observe the safety limitations, the assembly instructions and the operating instructions to be found in this
Manual. All persons who use and service this machine must be acquainted with this Manual and must be informed about it's potential
hazards. Children and infirm people must not use this tool. Children should be supervised at all times if they are in the area in which the tool
is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general
rules of occupational health and safety.
The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in
connection with the tool's construction and design:
Contact with the blade.
Kickback.
Blade fracture.
Catapulting of blade pieces.
Damage to eyes if effective safety glasses or shield are not worm.
Damage to ears if effective ear defenders are not worn.
Injury or illness caused by inhalation of cuttings if breathing protection is not sufficient.
Always remove the battery from the tool before making any adjustments or performing maintenance.
Store tools safely. When not in use, tools should be stored in a dry, high place or locked up out of reach.
Do not force the tool. The tool will do the job better and safer working at the rate for which it was designed.
Use the correct tool for the job. Do not force small tools or attachments to do the job best handled by a heavier duty tool. Never use a tool for
a purpose other than that for which it was intended.
Dress correctly. Do not wear loose clothing or jewellery. They can be caught in moving parts.
Rubber gloves and non-slip footwear are recommended while working outdoors. If you have long hair, wear a protective hair covering.
Use safety accessories. Safety glasses and ear muffs should always be worn.
Do not overreach. Keep your footing secure and balanced at all times.