Pcipnp Settings; Clear Nvram; Pci Latency Timer - IBASE Technology MI945PA User Manual

BIOS SETUP

PCIPnP Settings

This option configures the PCI/PnP settings.
Main Advanced
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.

Clear NVRAM

Plug & Play O/S

PCI Latency Timer

Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15
DMA Channel 0
DMA Channel 1
DMA Channel 3
DMA Channel 5
DMA Channel 6
DMA Channel 7
Reserved Memory Size
Clear NVRAM
This item is used for clearing NVRAM during system boot.
Plug & Play O/S
This lets BIOS configure all devices in the system or lets the OS
configure PnP devices not required for boot if your system has a Plug
and Play OS.
PCI Latency Timer
This item sets value in units of PCI clocks for PCI device latency timer
register. Options are: 32, 64, 96, 128, 160, 192, 224, 248.
36
BIOS SETUP UTILITY
PCIPnP
Boot
[No]
[No]
[64]
[Yes]
[Disabled]
[Enabled]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Disabled]
MI945PA User's Manual
Security Chipset
Size of memory block
to reserve for legacy
ISA devices.
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Exit