Air Live WN-200HD User Manual
  1. Manuals
  2. Brands
  3. Air Live Manuals
  4. IP Camera
  5. WN-200HD
  6. User manual

Air Live WN-200HD User Manual

2.0 mega pixel wireless 150mbps
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
 
 
 
 
 
WN-200HD
2.0 Mega Pixel Wireless
150Mbps IP Camera
User's Manual
  i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WN-200HD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Air Live WN-200HD

Summary of Contents for Air Live WN-200HD

  • Page 1           WN-200HD 2.0 Mega Pixel Wireless 150Mbps IP Camera User’s Manual   i...
  • Page 2 This product contains some codes from GPL. In compliance with GPL agreement, AirLive will publish the GPL codes on our website. Please go to www.airlive.com go to the "Support->GPL" menu to download source code. All Trademarks are properties of their respective holders. i  AirLive WN-200HD User’s Manual...

  • Page 3: Fcc Statement

    FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.   AirLive WN-200HD User’s Manual...

  • Page 4: Table Of Contents

    3.7.1 Digital Zoom .................23 3.7.2 Snapshot ................23 3.7.3 Record..................24 3.7.4 Volume .................25 3.7.5 About ..................25 4. Monitor the Image Section ................27 Monitor the Image Section ............27 Configure via Web UI ..............27 4.2.1 Network ................27 iii  AirLive WN-200HD User’s Manual...
  • Page 5 4.6.8 Event Schedule ..............66 5. Troubleshooting & FAQ................72 Monitor the Image Section ............72 PING .....................78 Bandwidth Estimation..............79 Specification Table ................80 Configure Port Forwarding Manually ..........82 DDNS ....................85 Power Line Frequency ..............92 3GPP Table...................94 UPnP.....................95   AirLive WN-200HD User’s Manual...

  • Page 6: Introduction

    Internet Explorer you get instant, on demand video streams. Within minutes you can set up the device to capture a video sequence to a PC. The live video can be uploaded to a website for the world to see. 1  AirLive WN-200HD User’s Manual...

  • Page 7: Features

    Microsoft Internet Explorer 6.0 or later Microsoft Media Player 11.0 or later (to playback recorded file) VGA Monitor resolution 1280 x 1024 or higher Pentium-4 3.6 GHz or higher Memory Size: 1GB or more Windows XP, Vista, 7   AirLive WN-200HD User’s Manual...

  • Page 8: Package Contents

    If any of the above items are missing, please contact your dealer immediately. Note: Using a power supply with a different voltage than the one included with the Network Camera will cause damage and void the warranty for this product. 1.5 Physical Description   1.5.1 Front View 3  AirLive WN-200HD User’s Manual...

  • Page 9: Bottom View

    2. DC Power Jack The input power is 12VDC. Note that supply the power to the Camera with the power adapter included in package. Otherwise, the improper power adapter may damage the unit and result in danger.   AirLive WN-200HD User’s Manual...
  • Page 10 This LED will be flashing while network accessing via Ethernet. 7. Power / Wireless LED (orange color) This LED is used to indicate whether DC power is on or not. In addition, this LED will be flashing while the wireless accessing of the Camera. 5  AirLive WN-200HD User’s Manual...

  • Page 11: Hardware Installation

    2. Place the Camera on the table or fix it onto ceiling or wall Use three screws to fix the Network Camera onto the ceiling or wall. You could also put the Network Camera on the table directly.   AirLive WN-200HD User’s Manual...
  • Page 12 4. Connect the external power supply to Camera Connect the attached power adapter to the DC power jack of the Network Camera. Note: Use the power adapter, 12VDC, included in the package and connect it to wall outlet for AC power. 7  AirLive WN-200HD User’s Manual...

  • Page 13: Getting Started

    When you installed the Camera on a LAN environment, you have two easy ways to search your Cameras by IPWizard II or UPnP™ discovery. Here is the way to execute IPWizard II to discover Camera’s IP address and set up related parameter in a Camera.   AirLive WN-200HD User’s Manual...
  • Page 14 2. Getting Started When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to search Network Cameras on the LAN. The existed devices will be listed as below. 9  AirLive WN-200HD User’s Manual...

  • Page 15: View

    2.1.2 In case you want to change the IP related parameters of wired interface, please select the device you want to configure and click the LAN button. Relative settings will be carried out as below.   AirLive WN-200HD User’s Manual...
  • Page 16 2. Getting Started You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below. 11  AirLive WN-200HD User’s Manual...
  • Page 17 Then, the related fields will show up as below. After keying in new username and password, click “Submit” button to perform your setting accordingly. Click “<<” button will go back to previous page.   AirLive WN-200HD User’s Manual...

  • Page 18: Wireless

    Wireless In case you want to change the IP related parameters of wireless interface, please select the device you want to configure and click the WIRELESS button. Relative settings will be carried out as above. 13  AirLive WN-200HD User’s Manual...
  • Page 19 2. Getting Started   Click SSID to select your wireless AP or router and key in WEP or WPA key. Click >> to next step:   AirLive WN-200HD User’s Manual...
  • Page 20 2. Getting Started Make sure wireless setting and then submit it. Click OK to confirm these parameters, then IPWizard II will start to configure this camera with specified information. 15  AirLive WN-200HD User’s Manual...

  • Page 21: Upnp For Windows

    Camera will be very easy to be found. Please refer to Appendix I to enable UPnP settings only if your operating system of PC is running Windows XP. Note: Windows 2000 does not support UPnP feature.   AirLive WN-200HD User’s Manual...

  • Page 22: Install The Ip Camera Behind Nat Router

    Installing the device with an UPnP router on your network is an easy 3–step procedure: (1) Enable UPnP option of your NAT router (2) Enable UPnP NAT traversal option of the Network Camera (default) (3) Access your Network Camera by DIPS 17  AirLive WN-200HD User’s Manual...

  • Page 23: Configure Ip Camera Via Web Ui

    2.4 Configure IP Camera via Web UI 1. Start the web browser on the computer and type the IP address of the Camera you want to monitor as below: The Login Window of the Camera is prompted:   AirLive WN-200HD User’s Manual...

  • Page 24: Login As User

    4. After the ActiveX control was installed and ran, the first image will be displayed. 2.4.1 Login as User If you log in the Camera as an ordinary User, “Setting” function will be not accessible. 19  AirLive WN-200HD User’s Manual...

  • Page 25: Login As Administrator

    If you log in the Camera as the Administrator, you can perform all the settings provided by the device. Start-up screen will be as follow no matter an ordinary users or an administrator. ActiveX Control Monitor Image 2-Way Audio Full Screen   AirLive WN-200HD User’s Manual...

  • Page 26: Configure The Camera

    The device could provide multiple languages to meet customer’s requirement. 3.5 Two-Way Audio The device supports 2-way audio function. User can chose to enable or disable this function by toggling the icon below. : Disable audio uploading function. : Enable audio uploading function. 21  AirLive WN-200HD User’s Manual...

  • Page 27: Full Screen

    On the ActiveX control icon, click the LeftMouseButton, then a menu pop-up. This menu provides features that are unique to the ActiveX control. These features include: • “Digital Zoom”, • “Snapshot”, • “Record”, • “Volume”, • “About”   AirLive WN-200HD User’s Manual...

  • Page 28: Digital Zoom

    3. Configure the Camera 3.7.1 Digital Zoom Click Digital Zoom to active this function as above. User can drag or scale the box over the video to adjust zoom ratio and position. 3.7.2 Snapshot 23  AirLive WN-200HD User’s Manual...

  • Page 29: Record

    3.7.3 Record Click Record to activate this function. Press Record button to start recording. The video file is saved as ASF format into your local PC. While you want to   AirLive WN-200HD User’s Manual...

  • Page 30: Volume

    Click Volume to activate this function. There are two control bars for speaker and microphone volume respectively. Scroll these control bars to adjust the audio attribute. Check the volume mute will mute the speaker output. 3.7.5 About 25  AirLive WN-200HD User’s Manual...
  • Page 31 3. Configure the Camera   Click About to show this ActiveX information.   AirLive WN-200HD User’s Manual...

  • Page 32: Monitor The Image Section

    Configure the schedule while event triggered 4.2 Configure via Web UI 4.2.1 Network Use this menu to configure the network to connect the device and the clients. This section provides the menu for connecting the device through Ethernet cable. 27  AirLive WN-200HD User’s Manual...
  • Page 33 If you do not select Obtain an IP address automatically, then you need to enter these network parameters manually. Obtain DNS from DHCP: DNS: Stands for Domain Name System. Enable this checked box when a DHCP server is installed on the network and provide DNS service.   AirLive WN-200HD User’s Manual...

  • Page 34: Wireless

    These settings should always be made in the camera first and secondly in the wireless access point. This ensures that the device is always accessible when making changes. Note that this function is only available for the model with WLAN capability. 29  AirLive WN-200HD User’s Manual...
  • Page 35 4. Monitor the Image Section   Setting (Easy Installation): Provides a 2-step procedure to configure wireless setting: Step 1: Select SSID of wireless router or access point (AP).   AirLive WN-200HD User’s Manual...
  • Page 36 The following information is provided: Interface Select: “Wired (Ethernet) only” or “Auto – wired if cable connected, otherwise wireless”: Choose wired or wireless mode. However, note that wired is priority. 31  AirLive WN-200HD User’s Manual...
  • Page 37 13 characters for 128-bit WEP. •HEX - In this method the string must be exactly 10 hexadecimal (0-9, A-F) characters for 64-bit WEP and 26 hexadecimal characters for 128-bit WEP. - Web Key 1~4: Key value of WEP.   AirLive WN-200HD User’s Manual...

  • Page 38: Ddns

    A dynamic DNS service is unique because it provides a means of updating your IP address so that your listing will remain current when your IP address changes. There are several excellent DDNS services available on the Internet. 33  AirLive WN-200HD User’s Manual...
  • Page 39 IP addresses. If users want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary. DDNS: To enable or disable the DDNS service here. Server name: Choose the built-in DDNS server.   AirLive WN-200HD User’s Manual...

  • Page 40: Pppoe

    Power on again, then the device will dial on to the ISP connect to the WAN through the xDSL modem. The procedures are • Connect to a LAN by DHCP or Fixed IP • Access the device; enter Setting Network PPPoE as below 35  AirLive WN-200HD User’s Manual...
  • Page 41 Type the password for the PPPoE service which is provided by the ISP. IP address, Subnet mask, and Gateway (read only): Shows the IP information got from PPPoE server site. Status: Shows the Status of PPPoE connection.   AirLive WN-200HD User’s Manual...

  • Page 42: Steaming

    Enter the RTSP port number to use. The default value is 554. RTP Port: Specify the range of transmission port number of video stream. The default range is 50000 to 50999. User can specify a number between 1024 and 65535. 37  AirLive WN-200HD User’s Manual...

  • Page 43: Upnp

    (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device. UPnP: To enable or disable the UPnP service here.   AirLive WN-200HD User’s Manual...

  • Page 44: Bonjour

    Bonjour is an open protocol which Apple has submitted to the IETF as part of the ongoing standards-creation process. Bonjour: To enable or disable the Bonjour service here. Friendly Name: Shows the friendly name of this device here. 39  AirLive WN-200HD User’s Manual...

  • Page 45: Ip Filter

    You can enter different user’s IP address which are allowing enter or denying by the device. IP Filter: To enable or disable the IP filter function here. IP Filter Policy: Choose the filter policy where is denying or allowing.   AirLive WN-200HD User’s Manual...

  • Page 46: Ip Notification

    Type the subject/title of the E-mail. TCP Notification: If enable this function, then the “TCP Server“, “TCP Port”, and “Message” fields need to be filled. TCP Server: Type the server name or the IP address of the TCP server. 41  AirLive WN-200HD User’s Manual...
  • Page 47 If enable this function, then the fields below need to be filled. URL: Type the server name or the IP address of the HTTP server. HTTP Login name: Type the user name for the HTTP server. HTTP Login Password: Type the password for the HTTP server.   AirLive WN-200HD User’s Manual...

  • Page 48: Camera - Adjust Camera Parameters

    User can set specific parameters to HTTP server. Message: The message will be sent to HTTP server. 4.3 Camera – Adjust Camera Parameters Use this menu to set the functions of the camera parameters of the device. 4.3.1 Picture 43  AirLive WN-200HD User’s Manual...
  • Page 49 Auto: will adjust the internal gain automatically. Hold: will hold the internal gain. Color Level: Large value will be colorful. Brightness: Large value will brighten camera. Sharpness: Large value will sharpen camera. Contrast: Large value will contrast camera heavily.   AirLive WN-200HD User’s Manual...

  • Page 50: Privacy Mask

    By dragging mouse on the image, you can change the position and size of the selected window accordingly. Name: Name of the specified window. Level Defines the gray level of mask block. The lower value will be darker. 45  AirLive WN-200HD User’s Manual...

  • Page 51: System - Configure And Maintain

    It’s a unique number of each device for identification and this ID is used for DIPS. In the Appendix G, it describes how to locate your device from Internet by DDNS service. However, we provide another easier way to do the same job called Dynamic IP Service, DIPS®.   AirLive WN-200HD User’s Manual...
  • Page 52 Software Version: This information shows the software version of the device. Network LED: To turn on or off Network LED. Power LED (Wireless LED): To turn on or off Power LED (wireless LED if WLAN model). 47  AirLive WN-200HD User’s Manual...

  • Page 53: Date & Time

    NTP sync. Interval: Select an interval between 1 and 23 hours at which you want to adjust the device’s time referring to NTP server Time zone: Set the time difference from Greenwich Mean Time in the area where the device is installed.   AirLive WN-200HD User’s Manual...

  • Page 54: Maintenance

    Backup Setting: To take a backup of all of the parameters, click this button. If necessary, it will then be possible to return to the previous settings, if settings are changed and there is unexpected behavior. 49  AirLive WN-200HD User’s Manual...
  • Page 55 3. Disable Motion Detection function. 4. Click “Browse” button. Select the Firmware binary file. (Note that it must make sure that the Firmware only applies to this device, once update, it will be burned into FLASH ROM of system.)   AirLive WN-200HD User’s Manual...

  • Page 56: Video - Configure Profile

    VGA but frame rate can be up to 30fps. User only can select either Mega-pixel or VGA mode to operate the camera. Switching Mega-pixel and VGA, the device will take time to reboot system. 51  AirLive WN-200HD User’s Manual...

  • Page 57: Common

    User can only choose either 720P or 2 Mega modes. The 720P mode can serve H.264 and JPEG streams up to 1280x720 resolution simultaneously. On the other hand, 2 Mega mode, it can streams up to 1600x1200 resolution simultaneously.   AirLive WN-200HD User’s Manual...

  • Page 58: Video Profile

    Enhanced Variable Bit Rate (EVBR). For CBR, the video bit rate is between low to high bandwidth based on different resolutions. User can set the desired bit rate to match the limitation of bandwidth. 53  AirLive WN-200HD User’s Manual...

  • Page 59: Roi

    Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then the video stream will have one Intra-frame every 30 frames. 4.5.3 ROI means Region of Interest. Use this page to specify ROI window which ROI is QVGA resolution.   AirLive WN-200HD User’s Manual...

  • Page 60: Audio - Audio Parameters

    4. Monitor the Image Section 4.6 Audio – Audio Parameters 4.6.1 Setting Audio: To enable or disable audio function 55  AirLive WN-200HD User’s Manual...

  • Page 61: Manage User Name, Password And Login Privilege

    Select “Anonymous” to allow any one viewing the video once connected. Otherwise, only users in database can view the video after login. Access Right: Administrator can access every function in this device. However, Viewers only can view the video and access limited function.   AirLive WN-200HD User’s Manual...

  • Page 62: E-Mail

    You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if users want to send the alarm message out, it will need to configure parameters here and also add at least one event schedule to enable event triggering. 57  AirLive WN-200HD User’s Manual...

  • Page 63: Object Detection

    Type the sender’s E-mail address. This address is used for reply e-mails. E-mail Subject: Type the subject/title of the e-mail. 4.6.4 Object Detection Use this menu to specify motion detection window 1 to window 10 and set the conditions for detection while observing a captured image.   AirLive WN-200HD User’s Manual...
  • Page 64 Defines the object size of motion detection. The higher object size will only larger objects trigger motion detection. The lower object size will even small objects trigger motion detection too. Generally speaking, the smaller size will be easier to trigger event. 59  AirLive WN-200HD User’s Manual...

  • Page 65: Storage - Status And Configuration Of Sd Card

    Enable automatic disk cleanup: Delete old recorded files while the conditions are reached as below. Remove recordings order than: Delete old files by days. Remove oldest recordings when disk is: Delete old files by left capacity.   AirLive WN-200HD User’s Manual...

  • Page 66: Recording List- Files List Inside Sd Card

    You may setup FTP parameters for further operation of Event Schedule. That’s, if users want to send the alarm message to an FTP server, it will need to configure parameters here and also add at least one event schedule to enable event triggering as SMTP. 61  AirLive WN-200HD User’s Manual...
  • Page 67 Check the FTP server whether this account is available or not. FTP Login name: Type the user name for the FTP server. FTP Login Password: Type the password for the FTP server. FTP Port: Set port number of FTP service.   AirLive WN-200HD User’s Manual...
  • Page 68 User can specify multiple TCP servers as wish. Therefore, user needs to specify a name for each TCP server setting. TCP Server: Type the server name or the IP address of the TCP server. TCP Port: Set port number of TCP server. 63  AirLive WN-200HD User’s Manual...
  • Page 69 HTTP Login name: Type the user name for the HTTP server. HTTP Login Password: Type the password for the HTTP server. Proxy Address: Type the server name or the IP address of the HTTP Proxy.   AirLive WN-200HD User’s Manual...
  • Page 70 User can specify multiple HTTP servers as wish. Therefore, user needs to specify a name for each HTTP server setting. SAMBA Server: Type the server name or the IP address of the SAMBA server. Test: Check the SAMBA server whether this account is available or not. 65  AirLive WN-200HD User’s Manual...

  • Page 71: Event Schedule

    Where the Schedule Trigger will be activated by user-define interval without event happened. Name: Name of the Event or Schedule. Enable: Enable or disable this Event or Schedule.   AirLive WN-200HD User’s Manual...
  • Page 72 Send file to FTP server by motion triggered always: Select event trigger Enable time: start from 00:00 to 24:00 every day Trigger by: Motion Area (Added in Object Detection page) Action : Send FTP (Add in Event Server -> FTP Server page) 67  AirLive WN-200HD User’s Manual...
  • Page 73 4. Action : Send e-mail (Add in E-Mail page) To email address: You need to input the receiver email address. Subject: You could specify the email subject. iii. Message: You could specify the email content.   AirLive WN-200HD User’s Manual...
  • Page 74 2. Enable time: Select Monday to Friday, and set start time from 18:00 and keep work in 6 hours. 3. Trigger by : You do not need to choose it, because this will be triggered every minute 4. Action : Voice Alert 69  AirLive WN-200HD User’s Manual...
  • Page 75 Choose JPEG, AVI-JPEG, or AVI-H.264 file format. Record File Prefix: Define the prefix of recorded filename. JPEG Picture Numbers: Define the picture numbers of JPEG to be sent out. Pre-Trigger Duration: Define the maximum duration of pre-alarm.   AirLive WN-200HD User’s Manual...
  • Page 76 4. Monitor the Image Section Post-Trigger Duration: Define the maximum duration of post-alarm. Max File Size: Define the maximum buffer size of record file. 71  AirLive WN-200HD User’s Manual...

  • Page 77: Troubleshooting & Faq

    The network cabling is The device uses Category 5 UTP cable allowing 10 required for the device. and/or 100 Base-T networking. The device will be If a firewall exists on the network, port 80 is open for   AirLive WN-200HD User’s Manual...
  • Page 78 Can not work with NAT • Maybe NAT router does not support UPnP function. router Please check user’s manual of router and turn on UPnP function. • Maybe UPnP function of NAT router is not compatible 73  AirLive WN-200HD User’s Manual...
  • Page 79 Network Camera, set up not to use the proxy server. • Confirm that Default Gateway address is correct. • The router needs Port Forwarding feature. Refer to your router's manual for details. • Packet Filtering of the router may prohibit access from   AirLive WN-200HD User’s Manual...
  • Page 80 Internet Explorer. Try to browse and log in again. Internet Explorer Setup the IE security settings or configure the individual displays the following settings to allow downloading and scripting of ActiveX message: “Your controls. current security settings prohibit 75  AirLive WN-200HD User’s Manual...
  • Page 81 • If FTP does not work properly, ask your ISP or network administrator about the transferring mode of FTP server. Pan/Tilt does not work. • Click [Refresh] on the Internet Explorer when the   AirLive WN-200HD User’s Manual...
  • Page 82 Cannot play the Have installed Microsoft®’s DirectX 9.0 or later and recorded ASF file use the Windows Media Player 11.0 or later to play the AVI filed recorded by the Device.         77  AirLive WN-200HD User’s Manual...

  • Page 83: Ping

    The replies, as illustrated below, will provide an explanation to the problem. If you want to detect any other devices conflicts with the IP address of Network Camera, also can utilize the PING command but you must disconnect the device from the network first.   AirLive WN-200HD User’s Manual...

  • Page 84: Bandwidth Estimation

    128 kbps or lower connection. Even though the upload speed is more than 128kbps, for optimal video performance, disabling audio streaming will get better video performance. 79  AirLive WN-200HD User’s Manual...

  • Page 85: Specification Table

    3GPP: AMR Audio Streaming One-way or two-way Microphone Built-in microphone Audio Output Adjustable audio output gain Network Supported IPv4, TCP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DDNS, DHCP, DIPS, ARP, Bonjour, UPnP, RTSP, Protocols   AirLive WN-200HD User’s Manual...
  • Page 86 SD card Indication LED Green and orange LEDs Operating 0°C to 40°C (32°F to 104°F) Temperature Operating 20% ~ 80% (non-condensing) Humidity Dimension HxWxD:74.5 x 52.6 x 35..0 (mm) Viewing System Windows® XP, Vista, 7 81  AirLive WN-200HD User’s Manual...

  • Page 87: Configure Port Forwarding Manually

    The following steps generally apply to any router that you have on your network. The D-Link DI-624 is used as an example to clarify the configuration process. Configure the initial settings of the router by following the steps outlined in the router’s Quick Installation Guide.   AirLive WN-200HD User’s Manual...
  • Page 88 If you could not get a Static IP address from your ISP, the DIPS™ or DDNS is a solution alternatively. Please refer to Appendix G for more information. 83  AirLive WN-200HD User’s Manual...
  • Page 89 80, you will need to change the port the camera uses from 80 to something else, such as 8080. Not all routers are the same, so refer to your user manual for specific instructions on how to open ports.   AirLive WN-200HD User’s Manual...

  • Page 90: Ddns

    Device or other TCP/IP Service. Get your own domain like www.yourname.com, www.yourname.com.tw etc. (Note: This domain must be registered with Internic via registration authorities such as Network Solutions, DirectNIC, Register.com etc). Your domain name's dynamic IP address is automatically tracked by a DDNS server. 85  AirLive WN-200HD User’s Manual...
  • Page 91 DDNS and PPPoE of the Networked Device in order to let the outside administrator be able to access through internet. 3. Application Steps—DDNS & Domain Name (1). Visit the following web site: http://www.dyndns.org/ (2). Click “Account”   AirLive WN-200HD User’s Manual...
  • Page 92 5. Troubleshooting & FAQ (3). After the columns show up at the left side, click “Create Account”. 87  AirLive WN-200HD User’s Manual...
  • Page 93   (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and finish creating an account Click these two options   AirLive WN-200HD User’s Manual...
  • Page 94 (5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated. Click to confirm 89  AirLive WN-200HD User’s Manual...
  • Page 95 DDNS server. Input your account (7). If the correct username and password are input, you can see the following picture at the top-right of the login page. (8). Click the “Services”.   AirLive WN-200HD User’s Manual...
  • Page 96 (Pink No.1) Then we pick a domain that is easy to remember. (Pink No.2) The 3 step is to click “Offline Hostname” from Service Type. (Pink No.3) Finally, click the “Create Host” to submit the domain name information and finish DDNS application. (Pink No.4) 91  AirLive WN-200HD User’s Manual...

  • Page 97: Power Line Frequency

    220V 50 Hz *Neutral and line wires are Argentina reversed from that used in Australia and elsewhere. Australia 230V* 50 Hz *Outlets typically controlled by adjacent switch. Though nominal voltage has been officially changed to   AirLive WN-200HD User’s Manual...
  • Page 98 Netherlands 230V 50 Hz Portugal 230V 50 Hz Spain 230V 50 Hz Sweden 230V 50 Hz Switzerland 230V 50 Hz Taiwan 110V 60 Hz Thailand 220V 50 Hz United Kingdom 230V* 50 Hz *Outlets typically 93  AirLive WN-200HD User’s Manual...

  • Page 99: 3Gpp Table

    2. Use the following URL to access: rtsp://host/mpeg4/media.3gp Where host is the host name or IP address of the camera. Compatible 3G mobile phone: Please contact your dealer to get the approved list of compatible 3G phone.   AirLive WN-200HD User’s Manual...

  • Page 100: Upnp

    5. Troubleshooting & FAQ 5.9 UPnP Use the following steps to enable UPnP settings only if your operating system of PC is running Windows XP. Go to Start > Settings. Click Control Panel Click Add or Remove Programs 95  AirLive WN-200HD User’s Manual...
  • Page 101 5. Troubleshooting & FAQ   Click Add/Remove Windows Components The following screen will appear: Select Networking Services   AirLive WN-200HD User’s Manual...
  • Page 102 5. Troubleshooting & FAQ Select Universal Plug and Play Click Details Click Next 97  AirLive WN-200HD User’s Manual...
  • Page 103 5. Troubleshooting & FAQ   Please wait while Setup configures the components. Click Finish   AirLive WN-200HD User’s Manual...

Table of Contents