Air Live OD-2050HD User Manual
  1. Manuals
  2. Brands
  3. Air Live Manuals
  4. IP Camera
  5. OD-2050HD
  6. User manual

Air Live OD-2050HD User Manual

2-megapixel ir outdoor vandal poe ipcam
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
l
AirLive OD-2050HD
2-MegaPixel IR Outdoor Vandal
PoE IPCAM
User's Manual
AirLive OD-2050HD
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OD-2050HD and is the answer not in the manual?

Questions and answers

Related Manuals for Air Live OD-2050HD

Summary of Contents for Air Live OD-2050HD

  • Page 1 AirLive OD-2050HD 2-MegaPixel IR Outdoor Vandal PoE IPCAM User’s Manual AirLive OD-2050HD...
  • Page 2 Model No. ____________________ Serial No. ____________________ To prevent fire or shock hazard, do not expose the unit to rain or moisture. For AC Adaptor to avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. AirLive OD-2050HD...

  • Page 3: Declaration Of Conformity

    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. AirLive OD-2050HD...
  • Page 4 We reserve the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement. AirLive OD-2050HD...

  • Page 5: Table Of Contents

    4.2 Camera: Adjust Camera Parameters ..............30 4.2.1 Picture .....................30 4.2.2 Privacy Mask ...................32 4.2.3 PTZ Setting....................33 4.2.4 Preset Setting ..................34 4.2.5 Tour Setting .....................34 4.3 System: Configure and Maintain System ............35 4.3.1 System ....................35 4.3.2 Date & Time.....................36 AirLive OD-2050HD...
  • Page 6 Appendix D: Bandwidth Estimation................64 Appendix E: Specifications ..................65 Appendix F: Configure Port Forwarding Manually ...........67 Appendix G: DDNS Application ................70 Appendix H: Power Line Frequency ................75 Appendix I: 3GPP ....................77 Appendix J: Enable UPnP of Windows XP ..............78 AirLive OD-2050HD...

  • Page 7: Introduction

    OD-2050HD is a member of AirLive's 2.0 Mega pixels IP camera family With its full blown network functions, such as H.264 video streaming, Power over Ethernet, and ONVIF, it can be easily integrated into your existing network.

  • Page 8: Package Contents

    User can find the following items in the package: Item Descriptions OD-2050HD Power Adapter dedicates 12V DC electric power output to Network Camera. User’s Manual CD provides installation software, application program, important information and instructions for operating the Network Camera. AirLive OD-2050HD User’s Manual...

  • Page 9: Connections

    Please use Category 5 cable to connect the Network Camera to a 100Mbps Fast Ethernet network switch or hub. In the LAN socket, there are two LEDs embedded: LAN LED (green color) This LED will be flashing while network accessing via Ethernet. AirLive OD-2050HD User’s Manual...
  • Page 10 Connect a loud speaker to the network camera. This function is for voice alerting and two-way audio. 7. BNC Connector The composite video format will be sent out through this connector. User might connect the IP Camera to a monitor or DVR via this connector. AirLive OD-2050HD User’s Manual...

  • Page 11: Mounting The Camera

    Once you have installed the camera well and powered it on, the power LED (orange) will turn on later. The power LED turned on, it means the system is booting up successfully. Furthermore, if you have a proper network connection, and access to the camera, the LAN LED (green) will flash. AirLive OD-2050HD User’s Manual...

  • Page 12: Preparation

    Camera’s IP address and set up related parameter in a Camera. 2.1.1 Search When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to search Network Cameras on the LAN. The existed devices will be listed as below. AirLive OD-2050HD User’s Manual...

  • Page 13: View

    View button. Then you could see the video from camera directly. Furthermore you could double click the left button of mouse to link to the network device by browser. AirLive OD-2050HD User’s Manual...

  • Page 14: Lan

    LAN button. Relative settings will be carried out as below. You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below. AirLive OD-2050HD User’s Manual...

  • Page 15: Upnp Of Windows® Xp, Vista Or 7

    Please refer to Appendix J to enable UPnP settings only if your operating system of PC is running Windows XP. Note: Windows 2000 does not support UPnP feature. To discover your device, go to your Desktop and click My Network Places. AirLive OD-2050HD User’s Manual...

  • Page 16: Install The Device Behind A Nat Router

    To use UPnP IGD function (NAT traversal), you need to make sure the UPnP function is enabled in your router. Most new home routers should support this function. Some of routers are default enable and others are not. Please check user’s manual of your NAT router for detail. AirLive OD-2050HD User’s Manual...

  • Page 17: Access The Device From The Internet Explorer For The First Time

    2. Type in your login name and password under “USERNAME” and “PASSWORD” textbox. For the first time use (default value), input the User Name: admin Password: airlive That’s type in “admin” on the “USERNAME” and “airlive” on the “PASSWORD”. Click “OK” button to start the main menu. AirLive OD-2050HD User’s Manual...

  • Page 18: Logging In As An User

    If you log in the Camera as an ordinary User, “Setting” function will be not accessible. 2.6 Logging in as an Administrator If you log in the Camera as the Administrator, you can perform all the settings provided by the device. AirLive OD-2050HD User’s Manual...

  • Page 19: Operating The Network Camera

    User can select proper streaming protocol according to networking environment. Language The device could provide multiple languages to meet customer’s requirement. 2-Way Audio The device supports 2-way audio function. User can chose to enable or disable this function by toggling the icon below. AirLive OD-2050HD User’s Manual...
  • Page 20 Note that this feature only supports on the ActiveX control within Microsfoft® Internet Explorer. On the ActiveX control icon, click the Left Mouse Button, then a menu pop-up. This menu provides features that are unique to the ActiveX control. These features include: “Digital Zoom”, “Snapshot”, “Record”, “Volume”, “About” AirLive OD-2050HD User’s Manual...
  • Page 21 OK to continue. If you like to retrieve the saved image, select the file to display the saved image by using any one of graph editing tools. AirLive OD-2050HD User’s Manual...
  • Page 22 Volume Click Volume to activate this function. There are two control bars for speaker and microphone volume respectively. Scroll these control bars to adjust the audio attribute. Check the volume mute will mute the speaker output. AirLive OD-2050HD User’s Manual...
  • Page 23 3. Operating the Network Camera About Click About to show this ActiveX information. AirLive OD-2050HD User’s Manual...

  • Page 24: Administrating The Device

    Setup E-Mail configuration Motion Motion Object detection Detection Storage Status and configuration of SD card Recording List Files list inside the SD Card Event Server Setup FTP/TCP/HTTP server for event Event Schedule Configure the schedule while event triggered AirLive OD-2050HD User’s Manual...

  • Page 25: Network: Configure Network Settings

    If you do not select Obtain an IP address automatically, then you need to enter these network parameters manually. Obtain DNS from DHCP DNS: Stands for Domain Name System. Enable this checked box when a DHCP server is installed on the network and provide DNS service. AirLive OD-2050HD User’s Manual...

  • Page 26: Https

    WAN, then the HTTP Port can be assigned as the virtual server port mapping to support multiple devices. Click “OK” to save and enable the setting. 4.1.2 HTTPS User can enable HTTPS for securing the video data if he enabled the HTTPS function. AirLive OD-2050HD User’s Manual...

  • Page 27: Ddns Service

    As to xDSL environment, most of the users will use dynamic IP addresses. If users want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary. AirLive OD-2050HD User’s Manual...

  • Page 28: Pppoe

    The device can directly connect to the xDSL, however, it should be setup on a LAN environment to program the PPPoE information first, and then connect to the xDSL modem. Power on again, then the device will dial on to the ISP connect to the WAN through the xDSL modem. AirLive OD-2050HD User’s Manual...

  • Page 29: Streaming

    RTP, multicast and Unicast, and for negotiating codecs. RTSP can be considered a "remote control" for controlling the media stream delivered by a media server. RTSP servers typically use RTP as the protocol for the actual transport of audio/video data. AirLive OD-2050HD User’s Manual...

  • Page 30: Upnp

    (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device. AirLive OD-2050HD User’s Manual...
  • Page 31 Show the IP address and port for WAN access through Internet. If NAT traversal is configured successfully, user can use this IP address and port to access this device. The external IP address is not shown in case NAT traversal function is failed. AirLive OD-2050HD User’s Manual...

  • Page 32: Bonjour

    This IP camera support ONVIF V1.0, V1.01 and V1.02. If you need to use ONVIF as your protocol for connecting the IP camera with your backend management system, you can enable this protocol in this page. AirLive OD-2050HD User’s Manual...

  • Page 33: Ip Filter

    You can enter different user’s IP address which are allowing enter or denying by the device. IP Filter To enable or disable the IP filter function here. IP Filter Policy Choose the filter policy where is denying or allowing. AirLive OD-2050HD User’s Manual...

  • Page 34: Ip Notification

    SMTP Notification (e-mail) If enable this function, then the “Send to“and “Subject” fields need to be filled. Send To Type the receiver’s e-mail address. This address is used for reply mail. Subject Type the subject/title of the E-mail. AirLive OD-2050HD User’s Manual...
  • Page 35 Type the server name or the IP address of the HTTP Proxy. Proxy Port Set port number of Proxy. Proxy Login name Type the user name for the HTTP Proxy. Proxy Login Password Type the password for the HTTP Proxy. AirLive OD-2050HD User’s Manual...

  • Page 36: Camera: Adjust Camera Parameters

    4.2 Camera: Adjust Camera Parameters Use this menu to set the functions of the camera parameters of the device. 4.2.1 Picture Rotation Turn the “Mirror” and “Vertical Flip” On or OFF. The image will be overturned as below. AirLive OD-2050HD User’s Manual...
  • Page 37 Click on this button if you need restore the value to default state. ICR Control User can use this function to determine the threshold to enabling/disabling ICR. Auto Iris Use the function to enable/disable or adjust the iris level. AirLive OD-2050HD User’s Manual...

  • Page 38: Privacy Mask

    By dragging mouse on the image, you can change the position and size of the selected privacy mask windows accordingly. Name Name of the specified motion window Level Select the color of the mask in gray level. AirLive OD-2050HD User’s Manual...

  • Page 39: Ptz Setting

    This is the camera ID set in PTZ camera or speed dome camera. Note that please DO NOT change the default value if unnecessary. If so, user needs to check and set value properly for both sides. Baud Rate This is the communication speed between network module and P/T scanner. AirLive OD-2050HD User’s Manual...

  • Page 40: Preset Setting

    Up to 128 positions can be preset, and the camera can be programming to move to the preset position sequentially. Tour Name The group name of the sequence of camera tour. The maximum number of camera tour is AirLive OD-2050HD User’s Manual...

  • Page 41: System: Configure And Maintain System

    It’s a unique number of each device for identification and this ID is used for DIPS. In the Appendix G, it describes how to locate your device from Internet by DDNS service. However, we provide another easier way to do the same job called Dynamic IP Service, DIPS®. AirLive OD-2050HD User’s Manual...

  • Page 42: Date & Time

    You can setup the device or make it synchronized with PC or remote NTP server. Also, you may select your time zone in order to synchronize time locally. Server Date & Time Displays the date and time of the device. PC Time Displays the date and time of the connected PC. AirLive OD-2050HD User’s Manual...
  • Page 43 Select an interval between 1 and 23 hours at which you want to adjust the device’s time referring to NTP server Time Zone Set the time difference from Greenwich Mean Time in the area where the device is installed. Daylight Saving Disable or enable the daylight saving adjustment. AirLive OD-2050HD User’s Manual...

  • Page 44: Maintenance

    Please contact your dealer for the latest version if necessary. Download the latest firmware file from our website or your dealer. Unzip this firmware file to binary file and store it into your PC. Then follow the steps as bellows carefully AirLive OD-2050HD User’s Manual...
  • Page 45 Furthermore, the firmware upgrade procedure always is risk and do not try to upgrade new firmware if it’s not necessary. System Restart The device is restarted without changing any of the network settings. It means the IP address of the device will not change after firmware upgrade. AirLive OD-2050HD User’s Manual...

  • Page 46: Video: Configure Profile

    Note: User can only choose either Mega or 2 Mega modes. Mega mode can serve H.264, MPEG4, and JPEG streams up to 1280x720 resolution simultaneously. On the other hand, 2 Mega mode, it can streams up to 1920x1080 resolution simultaneously. AirLive OD-2050HD User’s Manual...

  • Page 47: Video Profile

    Defines the targeted frame rate of this profile. For example, set the frame rate to 15 fps, then the image will be updated for 15 frames per second as possible. User need to set reasonable max frame rate versus video quality under the limited bandwidth. AirLive OD-2050HD User’s Manual...

  • Page 48: Roi

    Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then the video stream will have one Intra-frame every 30 frames. 4.4.3 ROI ROI means Region of Interest. Use this page to specify ROI window which ROI is QVGA resolution. 4.5 Audio: Audio Parameters AirLive OD-2050HD User’s Manual...

  • Page 49: User: Manage User Name, Password And Login Privilege

    Select “Anonymous” to allow any one viewing the video once connected. Otherwise, only users in database can view the video after login. Access Right Administrator can access every function in this device. However, Viewers only can view the video and access limited function. AirLive OD-2050HD User’s Manual...

  • Page 50: E-Mail: Setup E-Mail Configuration

    Type the SMTP server name or the IP address of the SMTP server. Test Send a test mail to mail server to check this account is available or not. SMTP Port Set port number of SMTP service. Enable SSL function or not. AirLive OD-2050HD User’s Manual...

  • Page 51: Object Detection: Setup Object Detection

    E-mail Subject Type the subject/title of the e-mail. 4.8 Object Detection: Setup Object Detection Use this menu to specify motion detection window 1 to window 10 and set the conditions for detection while observing a captured image. AirLive OD-2050HD User’s Manual...

  • Page 52: Storage

    Defines the sensitivity value of motion detection. The higher value will be more sensitivity. 4.9 Storage This page shows the status of attached SD card. You may setup related parameters to manage the attached SD card also. AirLive OD-2050HD User’s Manual...

  • Page 53: Event Server: Setup Ftp/Tcp/Http/Samba Server Configuration

    SMTP. Name User can specify multiple FTP paths as wish. Therefore, user needs to specify a name for each FTP setting. FTP Server Type the server name or the IP address of the FTP server. AirLive OD-2050HD User’s Manual...

  • Page 54: Tcp Server

    In addition to send video file to FTP server, the device also can send event message to specified TCP server. Name User can specify multiple TCP servers as wish. Therefore, user needs to specify a name for each TCP server setting. AirLive OD-2050HD User’s Manual...

  • Page 55: Http Server

    Type the server name or the IP address of the HTTP server. Test Check the HTTP server whether it is available or not. HTTP Login name Type the user name for the HTTP server. HTTP Login Password Type the password for the HTTP server. AirLive OD-2050HD User’s Manual...

  • Page 56: Samba Server

    SAMBA Server Type the server name or the IP address of the SAMBA server. Test Check the SAMBA server whether this account is available or not. SAMBA Login name Type the user name for the SAMBA server. AirLive OD-2050HD User’s Manual...

  • Page 57: Event Schedule: Configure The Event Schedule

    Name Name of the Event or Schedule. Enable Enable or disable this Event or Schedule. Type Event trigger or Schedule trigger. Enable Time Define the feasible time slot. Trigger by Select the triggered sources. AirLive OD-2050HD User’s Manual...
  • Page 58 Action : Send e-mail (Add in E-Mail page) To email address: You need to input the receiver email address. − Subject: You could specify the email subject. − Message: You could specify the email content. − AirLive OD-2050HD User’s Manual...
  • Page 59 Enable time: Select Monday to Friday, and set start time from 18:00 and keep work in 6 hours. Trigger by : You do not need to choose it, because this will be triggered every minute Action : Voice Alert AirLive OD-2050HD User’s Manual...

  • Page 60: Record

    4. Administrating the Device 4.12.2 Record User can choose the type of record file for event or schedule application. AirLive OD-2050HD User’s Manual...
  • Page 61 Define the picture numbers of JPEG to be sent out. Pre-Trigger Duration Define the maximum duration of pre-alarm. Post-Trigger Duration Define the maximum duration of post-alarm. Max File Size Define the maximum buffer size of record file. AirLive OD-2050HD User’s Manual...

  • Page 62: Appendix

    RS485 data + Gray RS485 data - Green/White Digital signal input Orange/White Digital signal output User can refer to the schematic below to make a proper connection between I/O connector and external sensor and output device. AirLive OD-2050HD User’s Manual...
  • Page 63 THAT REQUIRE LARGE AMOUNTS OF CURRENT. IN SOME CASES, A CUSTOM INTERFACE CIRCUIT (CUSTOMER PROVIDED) MAY HAVE TO BE USED. SERIOUS DAMAGE TO NETWORK CAMERA MAY RESULT IF A DEVICE IS CONNECTED TO THE EXTERNAL I/O THAT EXCEEDS ITS ELECTRICAL CAPABILITY. AirLive OD-2050HD User’s Manual...

  • Page 64: Appendix B: Troubleshooting & Frequently Asked Questions

    The HTTP port and RTSP firewall exists on the port need to be opened on the firewall or NAT router. network. username and Username = admin and Password = airlive. AirLive OD-2050HD User’s Manual...
  • Page 65 IP camera. Please contact your dealer to get the approval routers list. Some IP cameras are • Maybe too many IP cameras have been installed on working but others are the LAN, and then NAT router is out of resource to AirLive OD-2050HD User’s Manual...
  • Page 66 • Packet Filtering of the router may prohibit access from an external network. Refer to your router's manual for details. • Access the Network Camera from the Internet with the global IP address of the router and port number of Network Camera. AirLive OD-2050HD User’s Manual...
  • Page 67 ActiveX controls”. The device work • Might be caused from the firewall protection. Check the locally but not Internet firewall with your system or network externally. administrator. The firewall may need to have some AirLive OD-2050HD User’s Manual...
  • Page 68 There may be a slight delay when you are using the smoothly. Pan/Tilt feature in conjunction with streaming audio and video. If you find that there is a significant delay while panning or tilting the camera, try disabling the audio AirLive OD-2050HD User’s Manual...

  • Page 69: Appendix C: Ping Ip Address

    If you want to make sure the IP address of the device, utilize the PING command as follows: Start a DOS window. Type ping x.x.x.x, where x.x.x.x is the IP address of the device. AirLive OD-2050HD User’s Manual...

  • Page 70: Appendix D: Bandwidth Estimation

    8 ~ 20k byte per 256kbps~768kbps 192kbps~512kbps (QVGA) frame @ 30fps @ 30fps 640 x 480 20 ~ 50K byte per 512kbps~2048kbps 384kbps~1536kbps (VGA) frame @ 30fps @ 30fps 1280x1024 100 ~ 200k byte 512kbps~3076kbps (SXGA) per frame @ 15fps AirLive OD-2050HD User’s Manual...

  • Page 71: Appendix E: Specifications

    G.711, G.726, AMR for 3GPP Audio Streaming One/Two way audio Audio-in External microphone jack Audio-Out External speaker jack Network IPv4, TCP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, Protocol DDNS, DHCP, DIPS, ARP, Bonjour, UPnP, RTSP, RTP, RTCP, AirLive OD-2050HD User’s Manual...
  • Page 72 Windows® XP, Vista, 7 Browser IE 6.0 or later, Firefox 2.0 or later, Safari , Google Chrome Cell Phone With 3GPP player Video Player VLC, Quick Time, Real Player, Core Player Software Search & Installation IP Wizard II AirLive OD-2050HD User’s Manual...

  • Page 73: Appendix F: Configure Port Forwarding Manually

    Internet. Be sure to uncheck the Reset IP address at next boot button at the top of the screen after modifying the IP address. Failure to do so will reset the IP address when you restart your computer. AirLive OD-2050HD User’s Manual...
  • Page 74 Select Both under Protocol Type (TCP and UDP) Enter your camera’s local IP Address (e.g., 192.168.0.100, for example) in the Private IP field. If you are using the default camera port settings, enter 80 into the Public and Private Port section, click Apply. AirLive OD-2050HD User’s Manual...
  • Page 75 Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on this line to enable settings. Then the device can be access from WAN by the router’s WAN IP Address. By now, you have finished your entire PC configuration for this device. AirLive OD-2050HD User’s Manual...

  • Page 76: Appendix G: Ddns Application

    DDNS and PPPoE of the Networked Device in order to let the outside administrator be able to access through internet. Application Steps—DDNS & Domain Name 1. Visit the following web site: http://www.dyndns.org/ 2. Click “Account” AirLive OD-2050HD User’s Manual...
  • Page 77 3. After the columns show up at the left side, click “Create Account”. Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and finish creating an account AirLive OD-2050HD User’s Manual...
  • Page 78 Click these two options 5. Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated. AirLive OD-2050HD User’s Manual...
  • Page 79 DDNS server. Input your account 7. If the correct username and password are input, you can see the following picture at the top-right of the login page. AirLive OD-2050HD User’s Manual...
  • Page 80 5. Appendix 8. Click the “Services”. 9. Click the “Dynamic DNS”. 10. Click the “Get Started”. AirLive OD-2050HD User’s Manual...

  • Page 81: Appendix H: Power Line Frequency

    *Neutral and line wires are Argentina 220V 50 Hz reversed from that used in Australia and elsewhere. *Outlets typically controlled by adjacent switch. Australia 230V* 50 Hz Though nominal voltage has been officially changed to 230V, 240V AirLive OD-2050HD User’s Manual...
  • Page 82 Hz (Osaka, Kyoto, Nagoya, Hiroshima) Malaysia 240V 50 Hz Netherlands 230V 50 Hz Portugal 230V 50 Hz Spain 230V 50 Hz Sweden 230V 50 Hz Switzerland 230V 50 Hz Taiwan 110V 60 Hz Thailand 220V 50 Hz AirLive OD-2050HD User’s Manual...

  • Page 83: Appendix I: 3Gpp

    2. Use the following URL to access: rtsp://host/mpeg4/media.3gp Where host is the host name or IP address of the camera. Compatible 3G mobile phone: Please contact your dealer to get the approved list of compatible 3G phone. AirLive OD-2050HD User’s Manual...

  • Page 84: Appendix J: Enable Upnp Of Windows Xp

    5. Appendix Appendix J: Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operating system of PC is running Windows XP. Go to Start > Settings. Click Control Panel AirLive OD-2050HD User’s Manual...
  • Page 85 5. Appendix Click Add or Remove Programs Click Add/Remove Windows Components The following screen will appear: Select Networking Services Click Details AirLive OD-2050HD User’s Manual...
  • Page 86 5. Appendix Select Universal Plug and Play Click Ok Click Next AirLive OD-2050HD User’s Manual...
  • Page 87 5. Appendix Please wait while Setup configures the components. Click Finish AirLive OD-2050HD User’s Manual...

Table of Contents