Emissions Control System Warranty Parts - ILMOR 2011 MV8 User Manual

Emission
Control
System
Warranty Parts
Exclusions:
Failures other than those resulting from defects in material or workmanship are not cov-
ered by this warranty. T his warranty does not cover damage to emission control systems or
parts which are a result of owner abuse, neglect, improper maintenance, the incorporation
of, or use of, add on or modified parts, or the unapproved modification of any part.
This warranty does not cover replacement of expendable maintenance items made in
connection with required maintenance service as listed in the maintenance section of the
product Owner's Manual, examples of which include: spark plugs, filters, and belts. If a
part is repaired or replaced under this warranty, the life of the warranty is not extended
beyond its original expiration date.
Disclaimer:
This warranty is applicable only where the California and U.S. EPA emission control sys-
tem warranty regulation is in effect. T he use of add-on(s) or modified parts not exempted by
the California Air Resources Board or the U.S. EPA may be reason for not warranting a claim,
at the discretion of ILMOR Marine, LLC. In the case of non-exempted add-on(s) or modified
part(s) causing failure to a warranted part, the warranted part will not be covered.
Emission Control System Warranty Parts:
ILMOR Marine, LLC will warranty select emission control parts for 3 years or 480
hours, whichever first occurs.
Mechanical Emission-Related Components Warranty:
Systems Covered by this Warranty:
Fuel Metering
Air Induction
Ignition
Lubrication
Crankcase Ventilation System
Exhaust / Catalyst System
Evaporative
Miscellaneous Items
* Covered up to but not including the first required replacement only. See the Maintenance Schedule in the
Owner's Manual.
** MV8 5.7L only
2011 ILMOR MV8 Owner's Manual • Page 45
Parts Description:
Intake valves
Intake manifold
Air filter*
Spark plugs*
Ignition coil(s)
Ignition wires
Oil pump (includes internal parts)
PCV pipe
Fresh air pipe
PCV hose connector
Valve cover grommet
Oil filler cap
Exhaust manifold (tailpipe not included)
Exhaust valve(s)
Catalytic converter
Low-permeation hose(s)**
Hoses
Clamps
Fittings
Tubing
Sealing gaskets or devices
Mounting hardware
Pulleys
Belts*