MHG Heating ProCon 16 Installation And Operating Manual page 44

Legend
Button
1 WATER PRESSURE INDICATOR
2
3 COMMISSIONING MODE
4 SPECIFIC OPERATIONAL MODE INDICATOR
5 TIME OF DAY / AUTO RESETTING ERROR
6 HEATING CIRCUIT MODE INDICATOR
7 HOT WATER ACTIVATION INDICATOR
If required an enhanced operational review level can be accessed.
The table on the following page indicates the level of information that is available.
To access these parameters the following sequence must be undertaken.
Press and release the INFO.
Press & Hold the
The display will indicate b0
Use the
Use the or
Use the
To leave the enhanced operational review level press INFO or wait 8 minutes for automatic refresh.
MHG Heating Ltd Unit 4 Epsom Downs Metro Centre, Waterfield, Tadworth, Surrey KT20 5LR
Telephone 08456 448802 Fax 08456 448803 Email
© MHG Heating Ltd
Label
MAIN DISPLAY
Program Buttons simultaneously for at least 3 second.
Button to access the various b level parameters.
to access the other parameter levels C & d
Button to access the required levels within the desired parameter level.
Not used In ProCon Ranges
Flow Temperature or Selected Parameter Setting
Commissioning Mode Indicator Full Power (no
adjustment.)/Engineers Mode (full adjustment
via Program Up & Down Buttons.)
The Display Reflects the Operational Mode
Dependent Upon Inputs.
Time of Day Alternating with Automatic
Resetting Error Codes.
Indicator of Selected Heating Circuit Operating
Indication of Activation of Hot Water Production
info@mhgheating.co.uk Web www.mhgheating.co.uk
010109
Function
Mode.
Mode.
44