Subscribe to Our Youtube Channel
Related Manuals for Kisae MW 1210
Summary of Contents for Kisae MW 1210
- Page 1 Modified Sinewave Power Inverter 1000/1500 MW 1210, MW1215 True Sinewave Power Inverter 1000/2000 SW 1210, SW 1220 Owner’s Manual Modified Sinewave Series True Sinewave Series...
- Page 2 PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE Disclaimer While every precaution has been taken to ensure the accuracy of the contents of this guide, KISAE Technology assumes no responsibility for errors or omissions. Note as well that specifications and product functionality may change without notice.
-
Page 3: Table Of Contents
Table of Contents INTRODUCTION .................... 4 PRODUCT DESCRIPTION ................ 5 INSTALLATION .................... 5 UNIT OPERATION..................... 9 TROUBLESHOOTING .................. 10 SPECIFICATIONS ................... 11 WARRANTY..................... 12 Page 3... -
Page 4: Introduction
1. INTRODUCTION Thank you for purchasing the KISAE Power Inverter. With our state of the art, easy to use design, this product will offer you reliable service for providing AC power and 5V USB power for your home, cabin, RV or Trailer. The KISAE Power Inverter can run many AC-powered appliances when you need AC power anywhere. -
Page 5: Product Description
CAUTION: Before beginning your KISAE Power Inverter Installation, please consider the following: The KISAE Power Inverter base unit should be used or stored in an indoor area away from direct sunlight, heat, moisture or conductive contaminants. When placing the unit, allow a minimum of three inches of space around the unit for optimal ventilation. - Page 6 DC-rated fuse or DC-rated circuit breaker connected along the DC positive line is required. For MW 1210, SW 1210, select a fuse or circuit breaker with a minimum of 150 Adc For MW 1215, select a fuse or circuit breaker with a minimum of 225 Adc ...
- Page 7 terminal. For the grounding cable connected between the power inverter chassis to the earth ground, use a matching cable size as used on the DC Input Cable section. Installing the Power Inverter System WARNING Electrical Shock Hazard The unit ‘On/Off’ switch does not disconnect the DC power from the battery. Use the DC Disconnect Switch or disconnect the DC input cables connection to disconnect the DC power from the battery before working on any circuits connected to the unit.
- Page 8 Turn unit on by pressing and holding the On/Off button on the main unit for about a second until a beep sound occur. The ‘Status’ light turns on indicating the KISAE Power Inverter is ON. Check the digital display show measured battery voltage and output power alternatively.
-
Page 9: Unit Operation
WARNING: RISK OF EQUIPMENT DAMAGE For MW 1210, MW 1215: Do not plug surge-protected power bars into the unit’s 120 VAC outlets. The surge protected components on the surge-protected power bar may not like the modified sine wave output generate by the inverter. -
Page 10: Troubleshooting
Products are not compatible with the connected to unit unit do not accept modified sine wave output generated by the malfunction or modified sine wave output KISAE Power Inverter. See “AC Load on overheat (MW1210 & MW1215 Power Inverter” in Section 4 only) Page 10... -
Page 11: Specifications
SW 1220: 11.5 lbs (5.2 kg) Dimensions MW 1210: 12.3 x 6.9 x 3.4” ( 31.2 x 17.5 x 8.7 cm) MW 1215: 15.0 x 6.9 x 3.4” ( 38.2 x 17.5 x 8.7 cm) SW 1210: 12.6 x 6.9 x 3.4” ( 32.1 x 17.5 x 8.7 cm) SW 1220: 16.3 x 9.1 x 4.3”... -
Page 12: Warranty
The limited warranty program is the only one that applies to this unit, and it sets forth all the responsibilities of KISAE. There is no other warranty, other than those described herein. Any implied warranty of merchantability of fitness for a particular purpose on this unit is limited in duration to the duration of this warranty.
Need help?
Do you have a question about the MW 1210 and is the answer not in the manual?
Questions and answers