Canceling and
Preventing
Accidental
Alarms
9
Panel Indicator Lights
Use the following table to understand the panel indicator lights.
Button
Arm Doors & Windows
Arm Motion Sensors
Disarm
System Status
Chime Doors
Chime Special Motion
Time Lights
Sensor Lights
Numeric Pager
You may program your security system to send a numeric message indicating system
activities to your pager. The system will send the message twice. See "Programming
Instructions".
Use the following table to determine what the numeric message is reporting.
Reports
Numeric Message
Phone Test
-101 -101
AC Power Restore
-102 -102
AC Power Failure
-103 -103
Latchkey
-104 -104
No Activity
-105 -105
Panic Code
-106 -106
Emergency
-107 -107
One of the biggest concerns you might have regarding your security system, is causing
an accidental alarm. Most accidental alarms occur when leaving the residence after
arming the system, or, before disarming the system upon your return.
Canceling Accidental Alarms
You may have up to 254 seconds (programmable by your installer) to cancel an acciden-
tal alarm. See your installer to find out what time is programmed. If the programmed
time has passed, you must call the central monitoring station to cancel the alarm.
You have ___ seconds to cancel an accidental alarm.
Panel Indicator Lights
When the Button Light is
On
Doors/Windows armed
Motion Sensors armed
System disarmed
System trouble or Open Sen-
sor
Door will cause chime
Motion will cause chime
Time activated lights on
Sensor activated lights on
Numeric Pager Reporting
Reports
Intrusion
Fire
Disarming
Arming
Fail to Disarm
Fail to Arm
When the Button
Flashes
Doors/Windows armed
& No Entry Delay on
Motion Sensors armed
& Latchkey on
System subdisarmed
System in alarm
_________________
_________________
_________________
_________________
Numeric Message
-108 -108
-109 -109
-110 -110
-111 -111
-112 -112
-113 -113
Simon Security System
Need help?
Do you have a question about the Simon and is the answer not in the manual?