Installation Requirements
Your PaceMaster should be installed indoors on a flat, level surface near a 120Volt/ Grounded outlet. You must
have a minimum of 2 feet of clearance on all sides between the bike and any wall or obstruction.
TIP: If you are installing your PaceMaster on a carpeted surface, use a equipment mat or a scrap piece of
carpet underneath the Recumbent to avoid soiling of the carpet. Deep pile carpet is not recommended.
Unpacking Your Recumbent Exercise Bike
On the next page is a listing of all the parts included in the box. Open the box and confirm that you have
received all of the parts indicated on page 6. If you are missing parts please contact your Authorized
PaceMaster Dealer where you purchased your piece of equipment.
Tools Required for Assembly (included)
•
Phillips head screwdriver
•
13 mm Wrench
•
15 mm Wrench
•
4 mm Allen Wrench
•
6 mm Allen Wrench
ASSEMBLY INSTRUCTIONS
5