Refurbishment For Doa - Epson Stylus C41 Service Manual

Stylus C41/42/43/44 series

3.1.12 Refurbishment for DOA

If you clean the cavity of the printhead and cap assembly, this function will be useful.
T
After carry out this function, replace the waste drain ink pad
C A U T I O N
with new one and reset the Waste drain ink pad counter.
Otherwise, the ink or S46 liquid may leak from the pad during
the transportation.
T
Prepare the following tool.
*Dummy ink cartridge, Injector, S46 liquid
T
Do not carry out this program repeatedly. This operation is
available only one time. Excessive operation causes overflow of
the ink and S46 liquid.
T
When you refurbish the repair product by using this program,
do it on your responsibility.
T
When you charge S46 liquid into the dummy ink cartridge with
the Injector, make sure fill out the dummy ink cartridge with S46
liquid. In case enough S46 liquid is not charged into the dummy
cartridge, the printhead will not cleaned and not filled with the
S46 liquid enough in this operation.
T
Keep the S46 liquid and the dummy ink cartridge clean.
1. Choose the "Refurbishment for DOA" in the Maintenance menu.
Figure 3-24. Choose the Refurbishment for DOA menu
Adjustment
2. Set the dummy cartridge in the printer using the ink replacement function.
3. Select "Yes" under "Item," then click the "OK" button. The "Refurbishment for
DOA" function is then executed.
Overview
Revision B
47