Eeprom Initial Setting - Epson Stylus C41 Service Manual

Stylus C41/42/43/44 series

3.1.4 EEPROM initial setting

This function is used when replacing the MAIN board.
Using this function enables writing of the initial setting values to the new MAIN
board's EEPROM.
1. Choose the "EEPROM initial setting" in the Adjustment menu.
Figure 3-6. EEPROM initial setting (1)
2. Click the "OK" button, then the initial setting values are written to the MAIN
board. If choose "Check", the destination setting will be appera.
Adjustment
Figure 3-7. EEPROM initial setting (2)
Overview
Revision B
38