Specifications; Binding Receiver To Transmitter - Spektrum SR201 Instruction Manual

SR201 Instruction Manual
™
The Spektrum SR201 2-channel DSM
ible with all Spektrum surface transmitters and operates in DSM mode.

Specifications

Type: DSM Dimensions (LxWxH): 1.62 x 1.06 x .58 in (41 x 27 x 15mm)
Channels: 2 Weight: 0.36 oz (10 g)
Band: 2.4GHz Voltage Range: 3.5–9.6V
SR201
Receiver Connection and Installation
Install the Receiver in your vehicle using double-sided foam servo tape.
Foam servo tape will hold the receiver in place and help isolate it from
vibrations. Mount the antenna up and away from the vehicle in an antenna
tube. The higher up the antenna is, the better signal it will receive.
NOTICE: Do not cut the antenna.

Binding Receiver to Transmitter

In order to operate, the receiver must be bound to the transmitter. Binding
is the process of programming the receiver to recognize the GUID (Globally
Unique Identifier) code of a single specific transmitter. When a receiver is
bound to a transmitter/model memory, the receiver will only respond to
that specific transmitter/model memory.
Binding
1. With the receiver off, insert the bind plug into the BIND port in the
receiver.
2. Power the receiver through any port. If an ESC is being used, power
on the ESC with the ESC lead plugged in the throttle channel port. The
green LED will flash continuously, indicating that the receiver is in bind
mode.
Powering the receiver with a separate receiver pack
Receiver
2.4Ghz DSM
SR201
THR
SPORT SURFACE
RECEIVER
STR
BIND
®
Sport Surface receiver is compat-
THR
STR
BIND
Antenna
LED
Throttle Port
Steering Port
Bind/Battery Port
Bind Plug
Throttle Servo
Steering Servo
Battery
EN