Notes :
•
•
3.4.1.2. Required space
Install the product on a flat surface that fulfills the following conditions.
Notes :
•
Avoid the following temperature and humidity conditions. Otherwise, printed images
may appear differently from what you expect:
Places where sudden changes in temperature and humidity are expected, even
o
though the condition is within the range written above.
Places where direct sunlight or excessive lighting are expected.
o
Places where air conditioners blow directly.
o
MUTOH recommends that the printer should be installed where air conditioning can be
adjusted easily.
Refer to "Product Specifications" of the User's Guide for the information of the product.
a=1000mm b=1000mm c=2500mm d=600mm e=1250mm
Rockhopper II series printers – User's Guide
43
AP-75095, Rev. 2.0, 24/10/03