Ir Pass-Through - Zektor Z57BD2C User Manual

IR Pass-through

IR Blaster
IR Sockets
IR Blaster: Plug in the IR blaster here to emit all IR command signals received from the IR receiver to control the HDMI
source devices.
IR Receiver: Plug in the IR receiver here to receive all IR command signals from the IR remote controls of the HDMI
source devices.
CAUTION!
Incorrect insertion for IR blaster and IR receiver to wrong 3.5mm infrared sockets may result in the
failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective
IR sockets.
3.5mm connection
IR Blaster
You can buy any IR extension cables in the market that are compatible to the definition of the IR sockets for
the matrix if necessary for replacement use. However, IR cables longer than 2m (6‐ft) may not work.
IR Receiver
~ 7 ~
IR Receiver