Front Panel — Transmitting Unit Z57BD2C [TX]
1. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver.
2. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
3. HDMI IN: Connect to a HDM™I source with a HDM™I male-male cable here
Rear Panel — Transmitting Unit Z57BD2C [TX]
4. A/V SIGNAL: Plug in a Cat-5/5e/6 cable that needs to be linked to the A/V SIGNAL port of the receiving unit Z57BD2C
[RX ].
5. CTRL CHANNEL: Plug in a Cat-5/5e/6 cable that needs to be linked to the CTRL CHANNEL port of the receiving unit
Z57BD2C [RX ].
1
2
3
4
~ 4 ~
Panel Descriptions
5