Safety and Notice The SoloCAT™ Z54S HDMI™ over Single Coaxial Extender has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the SoloCAT™ Z54S should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Page 3
Introduction The SoloCAT™ Z54S HDMI™ over Single Coaxial Extender boosts up your HDMI™ transmission range up to 60m (180ft) in HDTV 1080p format through single coaxial cable SoloCAT™ Z54S is easy to install and works perfectly with Belden 1694A coaxial cables. Other coaxial cables can also work with SoloCAT™ Z54S and the transmission distance depends upon the quality and bandwidth of coaxial cables.
Panel Descriptions Specifications & Package Contents Transmitter: SoloCAT™ Z54S[TX] HDMI™ input view 2-pin DIP Switch: Please see below table for detail information HDMI™ IN: Connect to a HDMI™ source device with a HDM™I male-male cable here +5V DC: Connect to a 5V DC power supply unit LED: Green light means video in Full-HD mode.
Page 5
Panel Descriptions Transmitter: SoloCAT™ coax output view : SoloCAT™ Z54S[RX] Receiver Coax input view HDMI™ output view HDMI OUT: Connect to a HDMI™ display with a HDMI™ male-male cable here +5V DC: Connect to a 5V DC power supply unit LED: Orange light means in normal operation mode.
1 year from the date of purchase from authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The Zektor Incorporated, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surge.