Front Panel — Receiving Unit Z57BD2C [RX ]
6. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver.
7. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
8. HDMI OUT: Connect to a HDMI™ display with a HDMI™ male-male cable here.
Rear Panel — Receiving Unit Z57BD2C [RX ]
9. A/V SIGNAL: Plug in a Cat-5/5e/6 cable that needs to be linked to the A/V SIGNAL port of the transmitting unit
Z57BD2C [TX].
10. CTRL CHANNEL: Plug in a Cat-5/5e/6 cable that needs to be linked to the CTRL CHANNEL port of the transmitting
unit Z57BD2C [TX].
6
7
8
9
10
~ 5 ~