Connecting Alarm Device - LG LCB5500-BN Owner's Manual

Connections
LEFT Button
Right Button
Up Button
Down Button
Menu Button

Connecting Alarm Device

Alarm terminals are used to connect the alarm (relay)
devices such as sensors, door switches, etc.
Connect the alarm (relay) device to the alarm (relay) output
terminal. Alarm signal outputs at an event occurrence.
Alarm (Relay)
Device
14
E5, 86, ID, 12, 80, C.S.
E5, 86, ID, 12, 90, C.S.
E5, 86, ID, 11, 80, C.S.
E5, 86, ID, 11, 90, C.S.
E5, 86, ID, 41, 01, C.S.
Contact Ratings
• Maximum load current is
±100 mA.
• Do not connect any
system or device that has
over 20V DC or 28V AC on
the contact terminal.
Note:
Use a relay unit if the voltage or current of the
connected device exceeds the ratings.
Equivalent
Diagram