Table of Contents
Advertisement
NOTE: Please refer to the APPENDIX 4 for more details.
◇Set the PPPoE function
1. Click the network button in the home page.
2. Click the PPPoE button on the left side of the page to enter the "PPPoE
SETTING" page.
3. Choose "ON" from the "PPPoE mode" list to activate it.
4. Enter the Ac
5. Click the Submit button to submit the setting
NOTE: Please refer to section 5.1.8 for more details.
◇Use the Sub Hostname to view the Ipxcam
1. Click the URL block at the t
2. Type in the DDNS Host Name of the Ipxcam into the URL block and press the
"Enter" button to
3. Enter the user name and fill in the pa
4. Click the "OK" button and enter the home page
Questio
n 4:
How o add or modify the users and their authorities of using the Ipxcam?
t
◇E
ntering the sett
ing page
1.
Click the system button in the home page.
2.
Click the U
sers button on the left side of the page to enter the "SYSTEM - USERS" page.
◇A
dd a new user
1. P
lease enter the user name, the password, th
a
uthority.
T
here are three different levels of authorities, namely Ad
A
dmin: The user who accesses with the admin name and pa
even change the settings of the Ipxcam.
Ope
rator: The suggested choice for normal use.
Vi
ewer: The user who accesses with just the viewer name and password has only a limited
power to view.
2. Click the
Submit button to submit the new user's setting.
count and the Password which are provided from your ISP.
op of the PC screen.
enter the login page.
.
ssword.
of the Ipxcam.
e confirmed password and choose the
min, Operator and Viewer.
ssword has the full power to
80
Advertisement
Table of Contents
