Table of Contents
Advertisement
Change the Network Setting — PPPoE.
The "Network" page has, on its upper left, the "PPPoE" icon. Please follow the steps below to change the
PPPoE setting through the network if necessary.
1.
Click the PPPoE button at upper left above to enter the "PPPoE Setting" page.
2.
Please read the "PPPoE Troubleshooting" document first, then press "Close' button.
3.
Click the "PPPoE mode" to activate the function.
4.
Type in the PPPoE "Account" and the PPPoE "Password".
5.
Click the Submit button to submit the new setting.
6.
Click the Home button to return to the home page.
NOTE: Please refer to section 5.1.8 (PPPoE & DDNS) for more details.
Description of function keys:
PPPoE mode: Click your choices to enable the PPPoE function.
Account: Enter it in the given space.
Password: Enter it in the required space.
Submit: Click to set.
34
Advertisement
Table of Contents
