Install The Ip Surveillance In Your Pc - CBC DDK-1000 Installation & Operation Manual

5

.2.2 Install the IP surveillance in your PC

Install the IP surveillance from the supported CD-R.
1. Exit all applications currentl
2. Insert the supported CD in the CD-ROM drive. The program will execute the installation
automatically. Follo
procedure as they appear.
NOTE: It will update the .NET Framework to version 2.0 aut
to continue.
3. After the installation is complete, pop up the START menu from your computer, and point
to Programs / IPX IP-surveillance / IP surveillance to open up the program selection
page as shown below. Click the IP surveillance tag to start the Ipxcam IP surveill
program.
Insta l the IP surveillance for the ZIP file. l
1. Save the ZIP file to your PC and extract the file to a designated dir
2. Open the extracted folder. The folder contains 1 file.
3. Click on the
instructions to proceed with the rest of the installation procedure.
4. After the installation is complete, click the START menu from your computer, a
Programs / IP surveillance to start the IP surveillance program.
NOTE: Please make sure the TCP/IP communication software has been properly
set and configured in your computer. To check your TCP/IP settings, please
refer to section 4.5 (TCP/IP configuration setting).
y running in the selected PC.
w the on-screen instructions to proceed with the rest of the installation
icon to execute the installation and then follow the on-screen
omatically. Please click "Accept"
56
ance
ectory.
nd point to