Table of Contents
Advertisement
6. ADVANCED OPERATION
Ques
tion 1:
How t
o view the live images of the Ipxcam via the Microsoft Internet Explorer on the
Deskt
op PCs or the laptop computers in a situation where there are no monitors or
televis
ion?
◇The
way to get the IP address of the Ipxcam without a monitor:
There are three way to get the IP address: Scan IP, Upnp and IP function.
Scan IP: Please refer to
Upnp: Please ref
er to APPENDIX 2.
IP fu
nction: Please refer to APPENDIX 3.
Questio
n 2:
How to s
et up the motion detection area and its sensitivity? How to record into the
card f
or 30 seconds when the motion has been activated and use the Mi
Intern
et Explorer to view the recorded files?
◇Set up the motion detection
1. Click the application button in the home page.
2. Click the Motion detection button on the left side of the page to enter the "ALARM –
MOTION DETECTION" page.
3. Click and drag the mouse left button across a targeted zone to draw a red rectangle on
the image. You can also draw the other targeted zones as you wish.
4. Please Enable the motion detection function.
5. Set up the sensitivity level from: Lowest, Low, Medium and High to Highest.
6. Click the Submit button to submit the setting.
◇Recording the images into an SD card while the motion detection function is
working
1. Click the application button in the home page.
2. Click the Enable button below the ALARM item on the left side of the page to enter the
APPENDIX 1.
78 78
SD
crosoft
Advertisement
Table of Contents
