Table of Contents
Advertisement
Change the Application Setting — Alarm Application Enable Setting.
Please follow the steps below to change the setting via the network if necessary.
1.
Click the Enable Alarm button on the left side of the record to enter the "Alarm Application
Enable Setting" page.
2.
Click "Enable Alarm – Trigger an Alarm When Ethernet Is Lost" to checkmark the attached box
and activate the function
3.
Click "Enable Alarm – Save Into SD card" to checkmark the a
function.
4.
Enter the "Alarm Duration" you have chosen.
5.
Click the Submit button to submit the new setting of the recording.
6.
Click the Home button to re
Description of function keys:
Enable ALARM – Trigger an Alarm When Ethernet Is Lost: Activates or deactivates the alarm
trigge
ring while the Ethernet lost.
En
able Alarm – Save Into S
Alar
m Duration:
Predetermines the length of the alarm.
.
turn to the home page.
D card: Activates or deactivates the alarm recording to be saved to the
SD card.
49
ttached box and activate the
Advertisement
Table of Contents
