Advertisement
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols and the explanations with them deserve your careful
attention and understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warning they give are no substitutes
for proper accident prevention measures.
WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as "DANGER," "WARNING" and
"CAUTION," before using this reciprocating saw. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious personal injury
SYMBOL
To ensure safety and reliability, all repairs should be performed by
WARNING:
a qualified service technician at Authorized Service Center.
SIGNAL
Indicates an imminently hazardous situation,
DANGER:
which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation,
WARNING:
which, if not avoided, could result in death or
serious injury.
Indicates an potentially hazardous situation,
CAUTION:
which, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates a situation
NOTE:
that may result in property damage.
WARNING: The operation of any power tool can result in
foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety
glasses with side shields and a full-face shield when
needed. We recommend a Wide Vision Safety Mask for
use over eyeglasses or standard safety glasses with
side shields. Always use eye protection which is marked
to comply with ANSI Z87.1
MEANING
3
Advertisement
