Table of Contents
Advertisement
Set Imprint mode
A-61316 September 2004
If the time of day becomes incorrect for the Date function, you can reset it
by following the procedure below.
1. Press and hold the Shift key and the Output Selection key to enter
User mode.
2. Select U7.
3. Press the Exposure Mode key. When the Exposure Mode key is
pressed, both the Exposure Display and Multi-Print Display light up
steadily.
NOTE: In the initial condition, the year default setting is displayed.
•
Each time the Darker key is pressed, the Exposure Display scrolls
upward to select the current setting mode in the following order:
Month, Day, Hours, Minutes.
•
Each time the Lighter key is pressed, the Exposure Display scrolls
downward to select a default mode.
4. In each setting mode, press the Multi-Print key to enter the setting
value. Each press of the Multi-Print key increases the setting value.
When the value exceeds the maximum setting of the selected mode, it
returns to "00" or "01" (month, day).
5. Press the Start key to validate the time-of-day setting, when all of the
modes are completed.
3-25
Hide quick links:
Advertisement
Table of Contents
