Cisco DVR Configuration Manual page 14

Chapter 1 Enabling DVR Service

Logo: If you have a custom logo that you want to use for this service, enter
the logo ID for the desired logo. Otherwise, enter 0 (zero).

Parameter: Click the Number option and then enter 0 in the Number field.
Click Save to save the service information in the DNCS database and close the
5
Set Up SAM Service window. The SAM Service List window updates to include
the new service with its system-assigned service ID and application URL tag.
Record the service name here: __________________________________.
6
Note: You need this name as you continue to set up the service.
7 Add DVR service to Channel Maps. Go to Adding the DVR Service to Channel
Maps (on page 7).
6 4011411 Rev B