To Replace The Water Line From The Water Valve To The Fill Tube Grommet - Monogram ZIR36N LH Technical Service Manual

4. Disconnect the wiring harness connector and
water line from the water valve.
Connector Connector
Water Water
Line Line
5. Disconnect the copper tubing from the water
valve.
To Replace the Water Line from the Water Valve to
the Fill Tube Grommet:
Note: Some water may leak from the water supply
line and valve when they are disconnected.
1. Shut off the water supply to the freezer.
2. Remove the unit from its installation (see GE
Publication 49-60055, GE Monogram 36"
Refrigerators and 36" Freezers Custom
Options Guide and Installation
Instructions, pages 12-17).
3. Loosen 3 clamp screws.
Copper Copper
Tubing Tubing
Fill Tube Grommet Fill Tube Grommet
Water Water
Valve Valve
GEA00667
4. Loosen the clamp at the fill tube grommet.
Caution: Do not lose the tubing sleeve when
removing the water line from the fill tube grommet.
The sleeve must be used during reassembly to
avoid leaking.
5. Remove the water line from the fill tube
grommet.
6. Remove the sleeve from the water line.
7. Slide the water line down and out of 3 clamps.
– 18 –
Clamp Screws Clamp Screws
Water Line Water Line
GEA00638