JVC HX-GX7 Service Manual page 17

3.1.16 Removing the microphone board
(See Fig.30)
• Prior to performing the following procedure, remove the metal
cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the six
screws AE and screw AE' attaching the microphone board.
Reference:
• When attaching the microphone board, align the projections
ac of the front panel assembly in the holes of the microphone
board before attaching the screws AE and AE'.
• When attaching the screw AE', attach it with the wire holder.
3.1.17 Removing the headphone board
(See Fig.31)
• Prior to performing the following procedures, remove the metal
cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the
screw AF attaching the headphone board.
(2) Remove the wire holder fixing the wire and take out the
headphone board.
Reference:
After attaching the headphone board, fix the wire with the wire
holder.
3.1.18 Removing the cassette mechanism assembly
(See Fig.31)
• Prior to performing the following procedure, remove the metal
cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the
two screws AG and two screws AH attaching the cassette
mechanism assembly.
Reference:
When attaching the cassette mechanism assembly, align the
projections (ad,ae) in the holes of the cassette mechanism as-
sembly.
Microphone board
AE AE
ac
AE
Front panel assembly
Fig.30
Front panel assembly
Cassette mechanism assembly
AG
AG
ae
Fig.31
AE
ac
ac
Wire holder
AE'
Wire
Wire holder
ad
AH
Wire
AF
AH
Headphone board
(No.MB161)1-17