Printing Head - Oki PACEMARK 4410 Service Manual

3.3.18 Printhead
(1) Lean Frame Assy Rear backward and open Access Cover.
(2) Move the printhead to the recess on the right seen from the front.
(3) Pull out Ribbon Guide 1 upward.
(4) Unscrew 2 screws 2 and remove Printhead 3 from the connector.
(5) For installation, reverse the removal procedure.
(Note on Installation)
1. The head should be installed according to Section 9, Procedure for Installing Printhead in
Section 4 - ADJUSTMENTS.
2
1
3
71