Caution - Mira vigour Installation And User Manual

Thermostatic power shower
Table of Contents

Advertisement

10. Turn off the electrical and water supplies before removing the cover. The electricity
must be turned off at the mains and, if applicable, the appropriate circuit fuse
removed.
11. Mains connections are exposed when the cover is removed.
12. Moving parts are exposed when the cover is removed.
13. Isolate the electricity and water supplies and refer to "To contact us
page of this guide, if any of the following conditions occur:
The case is damaged
The Appliance shows signs of a distinct change in performance, indicating a
need for maintenance
14.

Caution!

1.
Read all of these instructions and retain this guide for later use.
2.
Pass on this guide in the event of change of ownership of the installation site.
3.
Follow all warnings, cautions and instructions contained in this guide.
4.
Follow all warnings, cautions and instructions contained on or inside the
appliance.
5.
The electrical installation must comply with the "Requirements for Electrical
Installations" commonly referred to as the IEE Wiring Regulations, or any particular
at the time of installation. The installation should be carried out by an electrician or
contractor who is registered with, or is a member of an association such as:
throughout the UK
6.
The plumbing installation must comply with Water Supply Regulations/Bye-laws
out by a plumber or contractor who is registered with, or is a member of an association
such as:
National Association of Plumbing, Heating and Mechanical Services Contractors
Scotland and Northern Ireland
7.
shower should be attended whilst showering. Particular consideration should be
operation of the controls.
8.
When the Appliance has reached the end of its serviceable life, it should be disposed
of in a safe manner, in accordance with current local authority recycling, or waste
disposal policy.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents