Airlink101 AR686WV2 User Manual page 36

Step 6 Setup the security settings for your new network. Please see AP Security
Settings in the Access Point section for more details. The factory default is 'password'.
We recommend changing that to something that only you will know.
Step 7 Press Save to apply the changes and initiate the AP+WDS function. Please allow
2-5 minutes before attempting to access the new network.
C. WDS
WDS mode is nearly identical is form and function to Repeater mode. Both achieve
the same goal, but WDS mode will only connect to another WDS-compatible device.
The connection between two WDS devices will be marginally stronger than in
Repeater mode.
Please see section 3.3.1.1 B for instructions on how to setup WDS mode.
32