Operation Mode; Wireless - Airlink101 AR686WV2 User Manual

3.2.5 Operation Mode

Select which mode you would like to run in:
Router Mode: Router mode will allow the AR686WV2 to act as a normal router with
its own DHCP server and IP Address.
Bridge Mode: Turn the AR686WV2 into a bridge by selecting Bridge Mode and
pressing Save.
NOTE: If would like to return the AR686WV2 from Bridge Mode to Router Mode, you will
need to perform a factory reset by holding the reset button for 10 seconds with the power
attached.

3.3 Wireless

Here you can configure the Networking properties of the router.
23