Epson Stylus CX1500 ME100 Service Manual page 53

EPSON Stylus CX1500/ME100
Occurrence
timing Detailed phenomenon
CR position
• Power on
When turning on the power, the SPC
does not operate at all.
• Anywhere
TROUBLESHOOTING
Table 3-4. Check point for the communication error according to each phenomenon
Defective
unit/part name
1. Check if the PS Board Connector Cable is connected to
the J1 on the Main Board.
PS Board Unit
2. Check if the PS Board Connector Cable/PS Board Unit
is not damaged.
Troubleshooting
Check point
Main Board Unit
PS Board Connector Cable
PS Board Unit
Remedy
1. Connect the PS Board Connector Cable to J1
on the Main Board.
J1
2. Replace the PS Board Unit with new one.
* If the problem is not solved, replace the
Main Board Unit with a new one.
Revision A
53