Audio Setup - Philips HTS3180 User Manual

[Sleep Timer]
Switches to standby automatically after the
preset time.
• [15 mins] , [30 mins] , [45 mins] , [60 mins]
– Selects the count down time before
the Home Theater System switches to
standby.
[Off] – Disables sleep timer mode.
•
[DivX(R) VOD Code]
Displays the DivX® registration code.
Tip
•
Enter this Home Theater System DivX
registration code when you rent or purchase
video from www.divx.com/vod. The DivX
videos rented or purchased through the
DivX® VOD (Video On Demand) service
can be played only on the device to which it is
registered.

Audio setup

Audio Setup
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
1
Press SETUP .
» [General Setup] menu is displayed.
2
to select [Audio Setup] , then
Press
press .
3
Select an option, then press OK .
4
Select a setting, then press OK .
• To return to the previous menu,
BACK .
press
• To exit the menu, press
•
See the explanations of the above options in
the following pages.
[Speakers Volume]
Sets the volume level of each speaker to get
the ideal audio balance.
1) To start, press OK .
2) Select a speaker in the menu, then press
3) Press OK to confi rm and exit.
•
The test tone is emitted from the speaker
which you adjust.
[Speakers Delay]
Sets the delay time for the center and rear
speakers if they are placed closer to the
listening position, so that the sound output
from all speakers reach the listening position
at the same time.
1) To start, press OK .
2) Select a speaker in the menu, then press
3) Press OK to confi rm and exit.
•
Allow 1ms setting for every 1 foot distance
between the speaker and the listening position.
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
SETUP .
•
Note
to adjust the volume level.
Note
to set the delay time.
Note
[On] – Enjoys quiet viewing at night.
[Off] – Enjoys surround sound with a full
dynamic range.
EN 25