Sync Audio Output With Video Play - Philips HTS3180 User Manual

Hts3180
Hide thumbs Also See for HTS3180:
Table of Contents

Advertisement

[Track Digest]
Plays the fi rst few seconds of each track in a
disc.
[Disc Interval]
Divides the total disc time by six and play the
fi rst few seconds of these intervals.
[Track Interval]
Divides the current track by six and play the
fi rst few seconds of these intervals.
This option is not available in stop mode.
Tip
You can change the PBC setting (see 'Adjust
settings' > 'Preference' > [PBC] ).

Sync audio output with video play

If the video play is slower than the audio
output (sound does not match with the
pictures), you can delay the audio output to
match the video.
1
Press and hold AUDIO SYNC until
'AUDIO SYNC XXX' is displayed. 'XXX'
denotes the delay time.
2
Within fi ve seconds, press VOL +/- to set
the delay time for audio output.
Note
If the volume control is not used within 5
seconds, it resumes normal volume control
function.
18
EN
Repeat play a specifi c section
1
During play, press REPEAT A-B at where
you want to set the starting point.
2
Press REPEAT A-B again to set the
ending point.
Repeat play starts.
»
3
To cancel repeat play, press REPEAT A-B
again.
Note
The marked section for repeat play is only
possible within a track/title.
View video play from different camera
angles
1
During play, press ANGLE repeatedly to
display the angle options.
Play changes to the selected angle.
»
Note
Applicable only to discs contain multi-angle
scenes.
Quick skip play to a specifi c time
1
During play, press
The disc status menu is displayed.
»
2
Press
to view information, then press
OK .
[TT Time] (title time)
[Ch Time] (chapter time)
[Disc Time] (disc time)
[Track Time] (track time)
3
Press the Numeric buttons to enter the
time where you want to skip to, then
press OK .
INFO .

Advertisement

Table of Contents
loading

Table of Contents