To Replace The Power Cord - Dimplex DS7420 Parts And Service Manual

DS7420
If unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.

TO REPLACE THE POWER CORD

1. Gently place stove on its back on a flat surface.
2. Remove the heater cover retaining screws located on the bottom of the stove and
lower heater and light assembly out onto the floor.
3. Remove all of the mounting screws on the heater cover and separate the cover from
the heater and light assembly.
4. Locate and disconnect the power cord wiring connections noting their original
locations.
5. With needle nose pliers grasp the power cord strain relief grommet from inside the
heater cover and push while twisting to remove.
6. Pull the power cord out through the hole in the heater cover.
7. Install the new power cord through the hole in the heater cover and connect all of the
wiring connections in their original locations.
8. Install the power cord retaining grommet on the power cord and insert into the hole
in the heater cover.
9. Reassemble in the reverse order as above.
14